Am Mittwoch, 10. April 2019, 01:14:05 CEST schrieb Matthias Kaehlcke: > Add GPIO D5 (BT_ENABLE_L) as reset-GPIO to the power sequence for the > Bluetooth/WiFi module. On devices with a Broadcom module the signal > needs to be asserted to use Bluetooth. > > Note that BT_ENABLE_L is a misnomer in the schematics, the signal > actually is active-high. > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> applied for 5.2 with Doug's rb. Thanks Heiko
