Re: [linux-sunxi] [PATCH v3 03/11] pinctrl: sunxi: Prepare for alternative bias voltage setting methods

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ondrej

On Thu, Apr 11, 2019 at 8:19 PM megous via linux-sunxi
<linux-sunxi@xxxxxxxxxxxxxxxx> wrote:
>
> From: Ondrej Jirman <megous@xxxxxxxxxx>
>
> H6 has a different I/O voltage bias setting method than A80. Prepare
> existing code for using alternative bias voltage setting methods.
>
> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> index ee15ab067b5f..4bfc8a6d9dce 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> @@ -95,6 +95,13 @@
>  #define PINCTRL_SUN7I_A20      BIT(7)
>  #define PINCTRL_SUN8I_R40      BIT(8)
>
> +enum sunxi_desc_bias_voltage {
> +       BIAS_VOLTAGE_NONE,
> +       /* Bias voltage configuration is done through
> +        * Pn_GRP_CONFIG registers, as seen on A80 SoC. */
> +       BIAS_VOLTAGE_GRP_CONFIG,
> +};
> +
>  struct sunxi_desc_function {
>         unsigned long   variant;
>         const char      *name;
> @@ -117,7 +124,7 @@ struct sunxi_pinctrl_desc {
>         const unsigned int              *irq_bank_map;
>         bool                            irq_read_needs_mux;
>         bool                            disable_strict_mode;
> -       bool                            has_io_bias_cfg;
> +       int                             io_bias_cfg_variant;

Shouldn't we be defining this field using the enum rather than as an int?

Thanks,

-- 
Julian Calaby

Email: julian.calaby@xxxxxxxxx
Profile: http://www.google.com/profiles/julian.calaby/



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux