Add DT binding documentation for the Linux driver for the SiFive asynchronous serial IP block. This revision incorporates changes based on feedback from Rob Herring <robh@xxxxxxxxxx>. Signed-off-by: Paul Walmsley <paul.walmsley@xxxxxxxxxx> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> Cc: linux-serial@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-riscv@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Cc: Palmer Dabbelt <palmer@xxxxxxxxxx> --- .../bindings/serial/sifive-serial.txt | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/sifive-serial.txt diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.txt b/Documentation/devicetree/bindings/serial/sifive-serial.txt new file mode 100644 index 000000000000..c86b1e524159 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/sifive-serial.txt @@ -0,0 +1,33 @@ +SiFive asynchronous serial interface (UART) + +Required properties: + +- compatible: should be something similar to + "sifive,<chip>-uart" for the UART as integrated + on a particular chip, and "sifive,uart<version>" for the + general UART IP block programming model. Supported + compatible strings as of the date of this writing are: + "sifive,fu540-c000-uart" for the SiFive UART v0 as + integrated onto the SiFive FU540 chip, or "sifive,uart0" + for the SiFive UART v0 IP block with no chip integration + tweaks (if any) +- reg: address and length of the register space +- interrupts: Should contain the UART interrupt identifier +- clocks: Should contain a clock identifier for the UART's parent clock + + +UART HDL that corresponds to the IP block version numbers can be found +here: + +https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart + + +Example: + +uart0: serial@10010000 { + compatible = "sifive,fu540-c000-uart", "sifive,uart0"; + interrupt-parent = <&plic0>; + interrupts = <80>; + reg = <0x0 0x10010000 0x0 0x1000>; + clocks = <&prci PRCI_CLK_TLCLK>; +}; -- 2.20.1
