Add the LM36274 backlight driver with regulator support. This is a multi-function device for backlight applications. Backlight properties will be documented in it's a supplemental bindings document. Regulator support is documented in the regulator/lm363x-regulator.txt http://www.ti.com/lit/ds/symlink/lm36274.pdf Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- v2 - No changes - https://lore.kernel.org/patchwork/patch/1058776/ .../devicetree/bindings/mfd/ti-lmu.txt | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index a948a8f41b2c..6ada671c1038 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -8,6 +8,7 @@ TI LMU driver supports lighting devices below. LM3632 Backlight and regulator LM3633 Backlight, LED and fault monitor LM3695 Backlight + LM36274 Backlight and regulator Required properties: - compatible: Should be one of: @@ -15,11 +16,13 @@ Required properties: "ti,lm3632" "ti,lm3633" "ti,lm3695" + "ti,lm36274" - reg: I2C slave address. 0x11 for LM3632 0x29 for LM3631 0x36 for LM3633 0x63 for LM3695 + 0x11 for LM36274 Optional property: - enable-gpios: A GPIO specifier for hardware enable pin. @@ -50,12 +53,14 @@ Optional nodes: - compatible: Should be one of: "ti,lm3633-fault-monitor" - leds: LED properties for LM3633. Please refer to [2]. + LED properties for LM36274. Please refer to [4]. - regulators: Regulator properties for LM3631 and LM3632. Please refer to [3]. [1] ../leds/backlight/ti-lmu-backlight.txt [2] ../leds/leds-lm3633.txt [3] ../regulator/lm363x-regulator.txt +[4] ../leds/leds-lm36274.txt lm3631@29 { compatible = "ti,lm3631"; @@ -213,3 +218,52 @@ lm3695@63 { }; }; }; + +lm36274@11 { + compatible = "ti,lm36274"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + + enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm363x-regulator"; + + enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>, + <&pioC 1 GPIO_ACTIVE_HIGH>; + + vboost { + regulator-name = "lcd_boost"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <7150000>; + regulator-always-on; + }; + + vpos { + regulator-name = "lcd_vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + + vneg { + regulator-name = "lcd_vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6500000>; + }; + }; + + backlight { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lm36274-backlight"; + + led@0 { + reg = <0>; + led-sources = <0 2>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; + }; +}; -- 2.21.0.5.gaeb582a983
