Dear Simon-san,
On 2019/04/09 21:15, Simon Horman wrote:
On Tue, Apr 09, 2019 at 01:51:38PM +0200, Simon Horman wrote:
On Tue, Apr 09, 2019 at 05:51:42PM +0900, Cao Van Dong wrote:
Add hscif{0|1|2} nodes to dtsi for HSCIF support on the RZ/G1C (r8a77470) SoC.
Signed-off-by: Cao Van Dong <cv-dong@xxxxxxxxxxx>
Thanks,
This looks fine to me but I will wait to see if there are other reviews
before applying.
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Sorry, I spoke a little too soon.
The following incremental change is required in order
for this patch to compile.
Please test that each patch in this series compiles and resubmit.
Thanks for your feedback. Very sorry for the trouble!
I will correct and resubmit in version 2.
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 85f7a6f68720..60bd79fc35f7 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -594,12 +594,12 @@
reg = <0 0xe62c0000 0 0x60>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 717>,
- <&cpg CPG_CORE r8a77470_CLK_ZS>, <&scif_clk>;
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc r8a77470_PD_ALWAYS_ON>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 717>;
status = "disabled";
};
@@ -610,12 +610,12 @@
reg = <0 0xe62c8000 0 0x60>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 716>,
- <&cpg CPG_CORE r8a77470_CLK_ZS>, <&scif_clk>;
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc r8a77470_PD_ALWAYS_ON>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 716>;
status = "disabled";
};
@@ -626,12 +626,12 @@
reg = <0 0xe62d0000 0 0x60>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 713>,
- <&cpg CPG_CORE r8a77470_CLK_ZS>, <&scif_clk>;
+ <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc r8a77470_PD_ALWAYS_ON>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 713>;
status = "disabled";
};
Thank you,
Dong
