On Tue, Apr 9, 2019 at 4:10 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote: > > On Tue, Apr 09, 2019 at 12:13:58AM +0800, Frank Lee wrote: > > On Fri, Apr 5, 2019 at 10:55 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote: > > > > > > Hi, > > > > > > On Fri, Apr 05, 2019 at 06:24:55AM -0400, Yangtao Li wrote: > > > > Allwinner Process Voltage Scaling Tables defines the voltage and > > > > frequency value based on the speedbin blown in the efuse combination. > > > > The sunxi-cpufreq-nvmem driver reads the efuse value from the SoC to > > > > provide the OPP framework with required information. > > > > This is used to determine the voltage and frequency value for each > > > > OPP of operating-points-v2 table when it is parsed by the OPP framework. > > > > > > > > This change adds documentation for the DT bindings. > > > > The "operating-points-v2-sunxi-cpu" DT extends the "operating-points-v2" > > > > with following parameters: > > > > - nvmem-cells (NVMEM area containig the speedbin information) > > > > - opp-supported-hw: A single 32 bit bitmap value, > > > > representing compatible HW: > > > > 0: speedbin 0 > > > > 1: speedbin 1 > > > > 2: speedbin 2 > > > > 3-31: unused > > > > > > > > Signed-off-by: Yangtao Li <tiny.windzz@xxxxxxxxx> > > > > --- > > > > .../bindings/opp/sunxi-nvmem-cpufreq.txt | 235 ++++++++++++++++++ > > > > 1 file changed, 235 insertions(+) > > > > create mode 100644 Documentation/devicetree/bindings/opp/sunxi-nvmem-cpufreq.txt > > > > > > > > diff --git a/Documentation/devicetree/bindings/opp/sunxi-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/sunxi-nvmem-cpufreq.txt > > > > new file mode 100644 > > > > index 000000000000..80201d4e5147 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/opp/sunxi-nvmem-cpufreq.txt > > > > @@ -0,0 +1,235 @@ > > > > +Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings > > > > +=================================== > > > > + > > > > +For some SoCs, the CPU frequency subset and voltage value of each OPP > > > > +varies based on the silicon variant in use. Allwinner Process Voltage > > > > +Scaling Tables defines the voltage and frequency value based on the > > > > +speedbin blown in the efuse combination. The sunxi-cpufreq-nvmem driver > > > > +reads the efuse value from the SoC to provide the OPP framework with > > > > +required information. > > > > + > > > > +Required properties: > > > > +-------------------- > > > > +In 'cpus' nodes: > > > > +- operating-points-v2: Phandle to the operating-points-v2 table to use. > > > > + > > > > +In 'operating-points-v2' table: > > > > +- compatible: Should be > > > > + - 'operating-points-v2-sunxi-cpu'. > > > > +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the > > > > + efuse registers that has information about the > > > > + speedbin that is used to select the right frequency/voltage > > > > + value pair. > > > > + Please refer the for nvmem-cells > > > > + bindings Documentation/devicetree/bindings/nvmem/nvmem.txt > > > > + and also examples below. > > > > + > > > > +In every OPP node: > > > > +- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW. > > > > + Bitmap: > > > > + 0: speedbin 0 > > > > + 1: speedbin 1 > > > > + 2: speedbin 2 > > > > + 3-31: unused > > > > > > I'm wondering if that's the right approach. > > > > > > I guess we could also have three different OPP tables, and pass them > > > all three through a phandle array, and have the kernel code select > > > which one is relevant based on the SID content > > > > It's ok. But why not use the way we already have? > > Is it necessary to introduce new helper? > > My main concern is that it becomes quite difficult to differentiate > the various OPPs, and to which bin a particular OPP is belonging to, > while the more traditional OPPv2 makes it much more obvious. Hi Maxime, How about the newer patch ? I think it is clearer. Just add a printk and people will know the opp information used. Yangtao > > Maxime > > -- > Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com
