On Tue, Apr 9, 2019 at 6:07 PM Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
>
> On 05-04-19, 06:24, Yangtao Li wrote:
> > +++ b/Documentation/devicetree/bindings/opp/sunxi-nvmem-cpufreq.txt
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu0: cpu@0 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + reg = <0>;
> > + enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + operating-points-v2 = <&cpu_opp_table>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu1: cpu@1 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + reg = <1>;
> > + enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + operating-points-v2 = <&cpu_opp_table>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu2: cpu@2 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + reg = <2>;
> > + enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + operating-points-v2 = <&cpu_opp_table>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu3: cpu@3 {
> > + compatible = "arm,cortex-a53";
> > + device_type = "cpu";
> > + reg = <3>;
> > + enable-method = "psci";
> > + clocks = <&ccu CLK_CPUX>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + operating-points-v2 = <&cpu_opp_table>;
> > + #cooling-cells = <2>;
> > + };
> > + };
> > +
> > + cpu_opp_table: opp_table {
> > + compatible = "operating-points-v2-sunxi-cpu";
> > + nvmem-cells = <&speedbin_efuse>;
> > + opp-shared;
> > +
> > + opp-480000000-0 {
> > + opp-hz = /bits/ 64 <480000000>;
> > + opp-microvolt = <880000>;
> > + opp-supported-hw = <0x1>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-720000000-0 {
> > + opp-hz = /bits/ 64 <720000000>;
> > + opp-microvolt = <880000>;
> > + opp-supported-hw = <0x1>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-816000000-0 {
> > + opp-hz = /bits/ 64 <816000000>;
> > + opp-microvolt = <880000>;
> > + opp-supported-hw = <0x1>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-888000000-0 {
> > + opp-hz = /bits/ 64 <888000000>;
> > + opp-microvolt = <940000>;
> > + opp-supported-hw = <0x1>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1080000000-0 {
> > + opp-hz = /bits/ 64 <1080000000>;
> > + opp-microvolt = <1060000>;
> > + opp-supported-hw = <0x1>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1320000000-0 {
> > + opp-hz = /bits/ 64 <1320000000>;
> > + opp-microvolt = <1160000>;
> > + opp-supported-hw = <0x1>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1488000000-0 {
> > + opp-hz = /bits/ 64 <1488000000>;
> > + opp-microvolt = <1160000>;
> > + opp-supported-hw = <0x1>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > +
> > + opp-480000000-1 {
> > + opp-hz = /bits/ 64 <480000000>;
> > + opp-microvolt = <820000>;
> > + opp-supported-hw = <0x2>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-720000000-1 {
> > + opp-hz = /bits/ 64 <720000000>;
> > + opp-microvolt = <820000>;
> > + opp-supported-hw = <0x2>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-816000000-1 {
> > + opp-hz = /bits/ 64 <816000000>;
> > + opp-microvolt = <820000>;
> > + opp-supported-hw = <0x2>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-888000000-1 {
> > + opp-hz = /bits/ 64 <888000000>;
> > + opp-microvolt = <820000>;
> > + opp-supported-hw = <0x2>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1080000000-1 {
> > + opp-hz = /bits/ 64 <1080000000>;
> > + opp-microvolt = <880000>;
> > + opp-supported-hw = <0x2>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1320000000-1 {
> > + opp-hz = /bits/ 64 <1320000000>;
> > + opp-microvolt = <940000>;
> > + opp-supported-hw = <0x2>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1488000000-1 {
> > + opp-hz = /bits/ 64 <1488000000>;
> > + opp-microvolt = <1000000>;
> > + opp-supported-hw = <0x2>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > +
> > + opp-480000000-2 {
> > + opp-hz = /bits/ 64 <480000000>;
> > + opp-microvolt = <800000>;
> > + opp-supported-hw = <0x4>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-720000000-2 {
> > + opp-hz = /bits/ 64 <720000000>;
> > + opp-microvolt = <800000>;
> > + opp-supported-hw = <0x4>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-816000000-2 {
> > + opp-hz = /bits/ 64 <816000000>;
> > + opp-microvolt = <800000>;
> > + opp-supported-hw = <0x4>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-888000000-2 {
> > + opp-hz = /bits/ 64 <888000000>;
> > + opp-microvolt = <800000>;
> > + opp-supported-hw = <0x4>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1080000000-2 {
> > + opp-hz = /bits/ 64 <1080000000>;
> > + opp-microvolt = <840000>;
> > + opp-supported-hw = <0x4>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1320000000-2 {
> > + opp-hz = /bits/ 64 <1320000000>;
> > + opp-microvolt = <900000>;
> > + opp-supported-hw = <0x4>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + opp-1488000000-2 {
> > + opp-hz = /bits/ 64 <1488000000>;
> > + opp-microvolt = <960000>;
> > + opp-supported-hw = <0x4>;
> > + clock-latency-ns = <244144>; /* 8 32k periods */
> > + };
> > + };
>
> Well, this is pure duplication of all the OPPs which isn't great. If I have
> understood things correctly from the above example, then all you want is a
> different microvolt value for each OPP, right ?
Not exactly like this. But this is working for the current situation.
>
> Then you are using the wrong feature of OPP core I am afraid. What you should
> rather look for is opp-microvolt-<name> property, look in opp.txt bindings.
Yeah. This is more appropriate.
>
> And these are the helper you need to use:
> dev_pm_opp_set_prop_name()/dev_pm_opp_put_prop_name().
Thanks,
Yangtao
>
> --
> viresh
