OrangePi One Plus and OrangePi Lite2 use the same PIO regulators. Add this in the common device tree. Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx> --- .../boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index 62e27948a3fa..4044f2dc66ac 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -70,6 +70,12 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_bldo3>; +}; + &r_i2c { status = "okay"; @@ -189,6 +195,17 @@ }; }; +&r_pio { + /* + * PL0 and PL1 are used for PMIC I2C + * don't enable the pl-supply else + * it will fail at boot + * + * vcc-pl-supply = <®_aldo1>; + */ + vcc-pm-supply = <®_bldo3>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; -- 2.17.1