The USB3 PHY driver (ti-pipe3) was updated so that the relevant clock phandles are expected in the DT node. Provide the necessary clocks. Reported-by: Kishon Vijay Abraham I <kishon@xxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- arch/arm/boot/dts/omap5.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 757f0b9..4df1e7a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -794,6 +794,12 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html