On Sat, Apr 06, 2019 at 04:57:33AM +0800, Icenowy Zheng wrote:
> The new Allwinner H6 SoC contains a USB3 PHY that is wired to the
> external USB3 pins of the SoC.
>
> Add a device tree binding for the PHY.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
> ---
> Changes in v5:
> - Dropped Vbus regulator and added connector subnode.
>
> Changes in v4:
> - Changed Vbus regulator property to vbus-supply.
>
> Changes in v3:
> - Added Chen-Yu's Review tag.
>
> No changes in v2, v1.
>
> .../bindings/phy/sun50i-usb3-phy.txt | 28 +++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt b/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
> new file mode 100644
> index 000000000000..eeedc53e6360
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
> @@ -0,0 +1,28 @@
> +Allwinner sun50i USB3 PHY
> +-----------------------
> +
> +Required properties:
> +- compatible : should be one of
> + * allwinner,sun60i-h6-usb3-phy
> +- reg : a list of offset + length pairs
> +- #phy-cells : from the generic phy bindings, must be 0
> +- clocks : phandle + clock specifier for the phy clock
> +- resets : phandle + reset specifier for the phy reset
> +
> +Optional nodes:
> +- connector : A sub-node required for representing the connector connected
> + to the USB PHY. See ../connector/usb-connector.txt for details.
> +
> +Example:
> + usb3phy: phy@5210000 {
> + compatible = "allwinner,sun50i-h6-usb3-phy";
> + reg = <0x5210000 0x10000>;
> + clocks = <&ccu CLK_USB_PHY1>;
> + resets = <&ccu RST_USB_PHY1>;
> + #phy-cells = <0>;
> +
> + connector {
> + compatible = "usb-a-connector";
> + label = "USB3";
The binding defines that a connector is a child of USB controller or
some port controller (such as USB-C ctrlr) with OF graph to USB
controller. So either way, this is wrong unless this is more than just a
phy.
Rob
