[PATCH v2 3/5] arm64: dts: allwinner: h6: move MMC pinctrl to dtsi

[Clément Péron <peron.clem@xxxxxxxxx>]

There is only one pinmuxing available for each MMC controller.

Move the pinctrl to the SOC

Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 2 --
 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts  | 4 ----
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi          | 4 ++++
 3 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index fd2af5095425..88b3a13f2360 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -56,8 +56,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 8b0b7675a53c..d8b0138be3d6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -104,8 +104,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
@@ -113,8 +111,6 @@
 };
 
 &mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	vqmmc-supply = <&reg_bldo2>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 91fecab58836..93ad756c0c95 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -273,6 +273,8 @@
 			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		        pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -301,6 +303,8 @@
 			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.17.1