[PATCH V2 10/20] Documentation: devicetree: spi: add spi-lsbyte-first propery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



spi-lsbyte-first optional property allows SPI slaves to choose byte
order of little endian for transfers.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/spi/spi-bus.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index 1f6e86f787ef..b455c24a80df 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -71,6 +71,7 @@ All slave nodes can contain the following optional properties:
 		    active high.
 - spi-3wire       - Empty property indicating device requires 3-wire mode.
 - spi-lsb-first   - Empty property indicating device requires LSB first mode.
+- spi-lsbyte-first - Empty property indicating device requires LSByte first mode.
 - spi-tx-bus-width - The bus width (number of data wires) that is used for MOSI.
 		    Defaults to 1 if not present.
 - spi-rx-bus-width - The bus width (number of data wires) that is used for MISO.
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux