Hi Joe,
On Thu, Apr 04, 2019 at 08:06:09AM -0700, Joe Perches wrote:
> These were missing '\n' terminations, add them.
>
> Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c | 19 ++++++++++---------
> 1 file changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
> index 158a6d548068..d88ea8da2ec2 100644
> --- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
> +++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
> @@ -123,7 +123,7 @@ static int jh057n_init_sequence(struct jh057n *ctx)
>
> ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> if (ret < 0) {
> - DRM_DEV_ERROR(dev, "Failed to exit sleep mode");
> + DRM_DEV_ERROR(dev, "Failed to exit sleep mode\n");
> return ret;
> }
> /* Panel is operational 120 msec after reset */
> @@ -132,7 +132,7 @@ static int jh057n_init_sequence(struct jh057n *ctx)
> if (ret)
> return ret;
>
> - DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done");
> + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
> return 0;
> }
>
> @@ -172,7 +172,7 @@ static int jh057n_prepare(struct drm_panel *panel)
> if (ctx->prepared)
> return 0;
>
> - DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel.");
> + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
> gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> usleep_range(20, 40);
> gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> @@ -180,7 +180,8 @@ static int jh057n_prepare(struct drm_panel *panel)
>
> ret = jh057n_init_sequence(ctx);
> if (ret < 0) {
> - DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d", ret);
> + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
> + ret);
> return ret;
> }
>
> @@ -212,7 +213,7 @@ static int jh057n_get_modes(struct drm_panel *panel)
>
> mode = drm_mode_duplicate(panel->drm, &default_mode);
> if (!mode) {
> - DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u",
> + DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
> default_mode.hdisplay, default_mode.vdisplay,
> default_mode.vrefresh);
> return -ENOMEM;
> @@ -241,7 +242,7 @@ static int allpixelson_set(void *data, u64 val)
> struct jh057n *ctx = data;
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>
> - DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on");
> + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
> dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
> msleep(val * 1000);
> /* Reset the panel to get video back */
> @@ -290,7 +291,7 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
>
> ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> if (IS_ERR(ctx->reset_gpio)) {
> - DRM_DEV_ERROR(dev, "cannot get reset gpio");
> + DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
> return PTR_ERR(ctx->reset_gpio);
> }
>
> @@ -315,12 +316,12 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
>
> ret = mipi_dsi_attach(dsi);
> if (ret < 0) {
> - DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?");
> + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
> drm_panel_remove(&ctx->panel);
> return ret;
> }
>
> - DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready",
> + DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
> default_mode.hdisplay, default_mode.vdisplay,
> default_mode.vrefresh,
> mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
>
Reviewed-By: Guido Günther <agx@xxxxxxxxxxx>
Thanks,
-- Guido
P.S.: The cc: list is huge, is there a reason for going way past what
get_maintainers puts out for this patch?
