RE: [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Yoshihiro-san,

Thank you for your patch!

> From: linux-kernel-owner@xxxxxxxxxxxxxxx <linux-kernel-owner@xxxxxxxxxxxxxxx> On Behalf Of Yoshihiro Shimoda
> Sent: 01 April 2019 13:01
> Subject: [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()
> 
> To implement multiple phy instances in the future, this patch uses
> pdev's device pointer on dev_vdbg() instead of the phy's device
> pointer.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>

> ---
>  drivers/phy/renesas/phy-rcar-gen3-usb2.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> index 0a34782..4bdb2ed 100644
> --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
> @@ -80,6 +80,7 @@
> 
>  struct rcar_gen3_chan {
>  	void __iomem *base;
> +	struct device *dev;	/* platform_device's device */
>  	struct extcon_dev *extcon;
>  	struct phy *phy;
>  	struct regulator *vbus;
> @@ -120,7 +121,7 @@ static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
>  	void __iomem *usb2_base = ch->base;
>  	u32 val = readl(usb2_base + USB2_COMMCTRL);
> 
> -	dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
> +	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host);
>  	if (host)
>  		val &= ~USB2_COMMCTRL_OTG_PERI;
>  	else
> @@ -133,7 +134,7 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
>  	void __iomem *usb2_base = ch->base;
>  	u32 val = readl(usb2_base + USB2_LINECTRL1);
> 
> -	dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
> +	dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
>  	val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
>  	if (dp)
>  		val |= USB2_LINECTRL1_DP_RPD;
> @@ -147,7 +148,7 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
>  	void __iomem *usb2_base = ch->base;
>  	u32 val = readl(usb2_base + USB2_ADPCTRL);
> 
> -	dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
> +	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
>  	if (vbus)
>  		val |= USB2_ADPCTRL_DRVVBUS;
>  	else
> @@ -401,7 +402,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
>  	irqreturn_t ret = IRQ_NONE;
> 
>  	if (status & USB2_OBINT_BITS) {
> -		dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status);
> +		dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
>  		writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
>  		rcar_gen3_device_recognition(ch);
>  		ret = IRQ_HANDLED;
> @@ -499,6 +500,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
> 
>  	platform_set_drvdata(pdev, channel);
>  	phy_set_drvdata(channel->phy, channel);
> +	channel->dev = dev;
> 
>  	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>  	if (IS_ERR(provider)) {
> --
> 2.7.4





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux