Re: [PATCH v2 0/5] Add bluetooth, gps and accelerometer to TBS A711

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 01, 2019 at 01:56:11PM +0200, megous@xxxxxxxxxx wrote:
> From: Ondrej Jirman <megous@xxxxxxxxxx>
> 
> This series enables some peripherals on TBS A711 tablet that already
> have mainline drivers:
> 
> - GPS u-blox neo-6m (via gnss u-blox driver)
> - Bluetooth (via recently added OF support in the Broadcom
>   bluetooth driver)
> - Accelermomter BMA-250 (hooked to the I2C bus)
> 
> It also modifies A83T DTSI and adds missing UART interfaces.
> 
> I've added additional compatible to the gnss/u-blox driver for NEO-6M,
> because this board uses this module, and I don't think I can use
> the existing compatible for u-blox,neo-m8, even as a fallback.
> 
> Please take a look, and apply the patches if you have no objections.
> 
> Many of the patches will go through the sunxi tree, but I'm not
> sure who will want to take the GPS patches.

I'll take the GPS patches through my tree once I've had a chance to
review them. Perhaps easiest to resend the corresponding dts change once
that is done.

Johan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux