On 03/31/2014 02:46 PM, Michal Simek wrote: > On 03/27/2014 07:21 PM, Punnaiah Choudary Kalluri wrote: >> Add driver for arm pl353 static memory controller nand interface. >> This controller is used in xilinx zynq soc for interfacing the nand >> flash memory. >> >> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx> >> --- >> drivers/mtd/nand/Kconfig | 8 + >> drivers/mtd/nand/Makefile | 1 + >> drivers/mtd/nand/pl353_nand.c | 1122 +++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 1131 insertions(+), 0 deletions(-) >> create mode 100644 drivers/mtd/nand/pl353_nand.c >> >> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig >> index 90ff447..31c1d0c 100644 >> --- a/drivers/mtd/nand/Kconfig >> +++ b/drivers/mtd/nand/Kconfig >> @@ -510,4 +510,12 @@ config MTD_NAND_XWAY >> Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached >> to the External Bus Unit (EBU). >> >> +config MTD_NAND_PL353 >> + tristate "ARM Pl353 NAND flash driver" >> + depends on MTD_NAND && ARM >> + select PL353_SMC > > Here should be probably depends on PL353_SMC. > I just found it. Just to be accurate. When MEMORY=n with select PL353_SMC you are not able select PL353_SMC and compile it. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
Attachment:
signature.asc
Description: OpenPGP digital signature
