Fill-in the missing PCIe phys/phy-names DT properties of Armada 7k/8k
based boards.
The MacchiatoBin is a bit particular as the Armada8k-PCI IP supports
x4 link widths and in this case the PHY for each lane must be
referenced.
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 2 ++
.../boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 2 ++
arch/arm64/boot/dts/marvell/armada-8040-db.dts | 10 ++++++++++
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 4 ++++
4 files changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 09e1805565c8..131ce4229db0 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -96,6 +96,8 @@
&cp0_pcie2 {
status = "okay";
+ phys = <&cp0_comphy5 2>;
+ phy-names = "cp0-pcie2-x1-phy";
};
&cp0_i2c0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 04e64743de14..b3716d206fbf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -237,6 +237,8 @@
pinctrl-names = "default";
pinctrl-0 = <&cp0_pci0_reset_pins>;
reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+ phys = <&cp0_comphy0 0>;
+ phy-names = "cp0-pcie0-x1-phy";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 057af4ea2570..91c51188650a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -111,11 +111,15 @@
/* CON6 on CP0 expansion */
&cp0_pcie0 {
+ phys = <&cp0_comphy0 0>;
+ phy-names = "cp0-pcie0-x1-phy";
status = "okay";
};
/* CON5 on CP0 expansion */
&cp0_pcie2 {
+ phys = <&cp0_comphy5 2>;
+ phy-names = "cp0-pcie2-x1-phy";
status = "okay";
};
@@ -201,16 +205,22 @@
/* CON6 on CP1 expansion */
&cp1_pcie0 {
+ phys = <&cp1_comphy0 0>;
+ phy-names = "cp1-pcie0-x1-phy";
status = "okay";
};
/* CON7 on CP1 expansion */
&cp1_pcie1 {
+ phys = <&cp1_comphy4 1>;
+ phy-names = "cp1-pcie1-x1-phy";
status = "okay";
};
/* CON5 on CP1 expansion */
&cp1_pcie2 {
+ phys = <&cp1_comphy5 2>;
+ phy-names = "cp1-pcie2-x1-phy";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index f0ead11cc5fa..0639437ab4b4 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -184,6 +184,10 @@
num-lanes = <4>;
num-viewport = <8>;
reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+ phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
+ <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+ phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
+ "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
status = "okay";
};
--
2.19.1
