Add USB3 host/device support by adding the right entries in the COMPHY
modes table. A new macro is created to instantiate a "generic" mode
ie. not an Ethernet one. This macro will be re-used when adding SATA
support.
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 24 ++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 21431e3e085a..3eb92a629dcc 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -148,6 +148,8 @@
#define COMPHY_FW_MODE_SGMII 0x2 /* SGMII 1G */
#define COMPHY_FW_MODE_HS_SGMII 0x3 /* SGMII 2.5G */
+#define COMPHY_FW_MODE_USB3H 0x4
+#define COMPHY_FW_MODE_USB3D 0x5
#define COMPHY_FW_MODE_RXAUI 0x7
#define COMPHY_FW_MODE_SFI 0x9 /* XFI: 0x8 (is treated like SFI) */
@@ -170,11 +172,23 @@ struct mvebu_comphy_conf {
.fw_mode = _fw, \
}
+#define GEN_CONF(_lane, _port, _mode, _fw) \
+ { \
+ .lane = _lane, \
+ .port = _port, \
+ .mode = _mode, \
+ .submode = PHY_INTERFACE_MODE_NA, \
+ .mux = -1, \
+ .fw_mode = _fw, \
+ }
+
static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
/* lane 0 */
ETH_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
ETH_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
/* lane 1 */
+ GEN_CONF(1, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
+ GEN_CONF(1, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
ETH_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
ETH_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
/* lane 2 */
@@ -182,15 +196,19 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
ETH_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_SFI),
+ GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
/* lane 3 */
ETH_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
ETH_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
ETH_CONF(3, 1, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
+ GEN_CONF(3, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
/* lane 4 */
ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2, COMPHY_FW_MODE_SFI),
ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI),
+ GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
+ GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_HS_SGMII),
ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_SFI),
@@ -619,6 +637,12 @@ static int mvebu_comphy_power_on(struct phy *phy)
return -ENOTSUPP;
}
break;
+ case PHY_MODE_USB_HOST_SS:
+ case PHY_MODE_USB_DEVICE_SS:
+ hide_error = true;
+ dev_dbg(priv->dev, "set lane %d to USB3 mode\n", lane->id);
+ fw_param = COMPHY_FW_PARAM(fw_mode, lane->port);
+ break;
default:
dev_err(priv->dev, "unsupported PHY mode (%d)\n", lane->mode);
return -ENOTSUPP;
--
2.19.1
