Hi, The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes. Depending on how many wires are used (24/12) the driver can set the correct bus_format. In case the bus-width is not specified (old DT blobs) assume 24 lines as the driver assumed that in the past and all boards using tfp410 uave this setup. Regards, Peter --- Peter Ujfalusi (2): dt-bindings: display: tfp410: Add bus-width parameter property drm/bridge: ti-tfp410: Set the bus_format .../bindings/display/bridge/ti,tfp410.txt | 10 +++++++++- drivers/gpu/drm/bridge/ti-tfp410.c | 17 +++++++++++++++++ 2 files changed, 26 insertions(+), 1 deletion(-) -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
