On 24/03/2019 16:14, Martin Blumenstingl wrote: > This adds the video decoder clocks for Meson8, Meson8b and Meson8m2. > > The clock tree on Meson8 differs from the one one Meson8b and Meson8m2. > Details can be found in patch #2. > > There are some checkpatch warnings in patch #2: > WARNING: please, no space before tabs > I decided to still send the patch because we have the same inconsistency > with all other clk_hw_onecell_data table entries. Please let me know if > I should come up with a follow-up patch to clean them all up. > > Testing: > I have not tested this with Maxime's video decoder driver yet. > However, I manually enabled and set various frequencies for the HCODEC > clock and verified that clkmsr reports the correct rate. > > Dependencies: > This is meant to be applied on top of my other series from [0]: > clk: meson8b: add the VPU clock tree > > Changes since v1 at [1]: > - collected Neil's and Maxime's Reviewed-by (thank you!) > > > [0] https://patchwork.kernel.org/cover/10860401/ > [1] https://patchwork.kernel.org/cover/10860513/ > > > Martin Blumenstingl (2): > dt-bindings: clock: meson8b: export the video decoder clocks > clk: meson: meson8b: add the video decoder clock trees > > drivers/clk/meson/meson8b.c | 312 +++++++++++++++++++++++ > drivers/clk/meson/meson8b.h | 17 +- > include/dt-bindings/clock/meson8b-clkc.h | 4 + > 3 files changed, 332 insertions(+), 1 deletion(-) > Applied [1] to next/headers and [2] to next/drivers for Linux 5.2-rc1
