On Mon, 31 Mar 2014 09:10:15 +0200, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > On Fri, Mar 28, 2014 at 09:08:00AM -0700, Grant Likely wrote: > > Hi all, > > > > This is a series that I've been playing with over the last few days to > > clean up the selection of default console devices when using the device > > tree. The device tree defines a way of specifying the console by using a > > "stdout-path" property in the /chosen node, but very few drivers > > actually attempt to use that data, and so for most platforms there needs > > to be a "console=" line in the command line if a serial port is intended > > to be used as the console. > > > > With this series, if there is a /chosen/stdout-path property, and if > > that property points to a serial port node, then when the serial driver > > registers the port, the core uart_add_one_port() function will notice > > and if no console= argument was provided then add it as a preferred > > console. > > > > I've not tested this very extensively yet, but I want to get some > > feedback before I go further. > > I gave it a test on i.MX. It works as expected with both > linux,stdout-path and stdout-path. Specifying a console on the > commandline still works and overrides the devicetree setting. > > Tested-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Brilliant! Thanks Sascha. Can you supply a patch to add stdout to the imx dts files? g. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
