replace avia-hx711.txt by avia-hx711.yaml as yaml devicetree documentation
for avia hx711 iio adc sensor
Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx>
---
.../devicetree/bindings/iio/adc/avia-hx711.txt | 24 --------
.../devicetree/bindings/iio/adc/avia-hx711.yaml | 67 ++++++++++++++++++++++
2 files changed, 67 insertions(+), 24 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
deleted file mode 100644
index 7222328a3d0d..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* AVIA HX711 ADC chip for weight cells
- Bit-banging driver
-
-Required properties:
- - compatible: Should be "avia,hx711"
- - sck-gpios: Definition of the GPIO for the clock
- - dout-gpios: Definition of the GPIO for data-out
- See Documentation/devicetree/bindings/gpio/gpio.txt
- - avdd-supply: Definition of the regulator used as analog supply
-
-Optional properties:
- - clock-frequency: Frequency of PD_SCK in Hz
- Minimum value allowed is 10 kHz because of maximum
- high time of 50 microseconds.
-
-Example:
-weight {
- compatible = "avia,hx711";
- sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
- dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- avdd-suppy = <&avdd>;
- clock-frequency = <100000>;
-};
-
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
new file mode 100644
index 000000000000..e4fee0f877ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: AVIA HX711 ADC chip for weight cells
+
+maintainers:
+ - Andreas Klinger <ak@xxxxxxxxxxxxx>
+
+description: |
+ Bit-banging driver using two GPIOs:
+ - sck-gpio gives a clock to the sensor with 24 cycles for data retrieval
+ and up to 3 cycles for selection of the input channel and gain for the
+ next measurement
+ - dout-gpio is the sensor data the sensor responds to the clock
+
+ Specifications about the driver can be found at:
+ http://www.aviaic.com/ENProducts.aspx
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: avia,hx711
+
+ sck-gpios:
+ description:
+ Definition of the GPIO for the clock (output). In the datasheet it is
+ named PD_SCK
+ maxItems: 1
+
+ dout-gpios:
+ description:
+ Definition of the GPIO for the data-out sent by the sensor in
+ response to the clock (input).
+ See Documentation/devicetree/bindings/gpio/gpio.txt for information
+ on how to specify a consumer gpio.
+ maxItems: 1
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog supply
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 20000
+ maximum: 2500000
+ default: 400000
+
+required:
+ - compatible
+ - sck-gpios
+ - dout-gpios
+ - avdd-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ weight {
+ compatible = "avia,hx711";
+ sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ avdd-suppy = <&avdd>;
+ clock-frequency = <100000>;
+ };
--
2.11.0
