On Tue, 26 Mar 2019 12:18:41 +0100 Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx> wrote: > From: Paresh Chaudhary <paresh.chaudhary@xxxxxxxxxxxxxxxxxxx> > > This patch added device tree binding info for MAX31856 driver. > > Signed-off-by: Paresh Chaudhary <paresh.chaudhary@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > Changes > v1 -> v2 > [Matt > - Removed comment block and added possibilities of > thermocouple type in device tree binding doc. > > v2 -> v3 > - Rebased > > v3 -> v4 > - Removed one-shot property related information. > - Used standard name 'temp-sensor' > > v4 -> v5 > [Patrick > - Rename thermocouple type to maxim,thermocouple-type for DT entry > > v5 -> v6 > [Patrick > - use generic thermocouple-type for DT entry > > v6 -> v7 > [Patrick > - None > --- > .../bindings/iio/temperature/max31856.txt | 24 +++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/temperature/max31856.txt > > diff --git a/Documentation/devicetree/bindings/iio/temperature/max31856.txt b/Documentation/devicetree/bindings/iio/temperature/max31856.txt > new file mode 100644 > index 000000000000..06ab43bb4de8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/temperature/max31856.txt > @@ -0,0 +1,24 @@ > +Maxim MAX31856 thermocouple support > + > +https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf > + > +Optional property: > + - thermocouple-type: Type of thermocouple (THERMOCOUPLE_TYPE_K if > + omitted). Supported types are B, E, J, K, N, R, S, T. > + > +Required properties: > + - compatible: must be "maxim,max31856" > + - reg: SPI chip select number for the device > + - spi-max-frequency: As per datasheet max. supported freq is 5000000 > + - spi-cpha: must be defined for max31856 to enable SPI mode 1 > + > + Refer to spi/spi-bus.txt for generic SPI slave bindings. > + > + Example: > + temp-sensor@0 { > + compatible = "maxim,max31856"; > + reg = <0>; > + spi-max-frequency = <5000000>; > + spi-cpha; > + thermocouple-type = <THERMOCOUPLE_TYPE_K>; > + };
