Hi Josh,
Please correct me if I'm wrong, but I don't see how this is going to work
without the central part - building asynchronous V4L2 data structures from
the DT, something that your earlier patch "media: soc-camera: OF cameras"
was doing, but which you stopped developing after a discussion with Ben
(added to Cc).
Thanks
Guennadi
On Tue, 25 Mar 2014, Josh Wu wrote:
> This patch add the DT support for Atmel ISI driver.
> It use the same v4l2 DT interface that defined in video-interfaces.txt.
>
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> v1 --> v2:
> refine the binding document.
> add port node description.
> removed the optional property.
>
> .../devicetree/bindings/media/atmel-isi.txt | 50 ++++++++++++++++++++
> drivers/media/platform/soc_camera/atmel-isi.c | 31 +++++++++++-
> 2 files changed, 79 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/atmel-isi.txt
>
> diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
> new file mode 100644
> index 0000000..11c98ee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
> @@ -0,0 +1,50 @@
> +Atmel Image Sensor Interface (ISI) SoC Camera Subsystem
> +----------------------------------------------
> +
> +Required properties:
> +- compatible: must be "atmel,at91sam9g45-isi"
> +- reg: physical base address and length of the registers set for the device;
> +- interrupts: should contain IRQ line for the ISI;
> +- clocks: list of clock specifiers, corresponding to entries in
> + the clock-names property;
> +- clock-names: must contain "isi_clk", which is the isi peripherial clock.
> +
> +ISI supports a single port node with parallel bus. It should contain one
> +'port' child node with child 'endpoint' node. Please refer to the bindings
> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> + isi: isi@f0034000 {
> + compatible = "atmel,at91sam9g45-isi";
> + reg = <0xf0034000 0x4000>;
> + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
> +
> + clocks = <&isi_clk>;
> + clock-names = "isi_clk";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_isi>;
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + isi_0: endpoint {
> + remote-endpoint = <&ov2640_0>;
> + };
> + };
> + };
> +
> + i2c1: i2c@f0018000 {
> + ov2640: camera@0x30 {
> + compatible = "omnivision,ov2640";
> + reg = <0x30>;
> +
> + port {
> + ov2640_0: endpoint {
> + remote-endpoint = <&isi_0>;
> + bus-width = <8>;
> + };
> + };
> + };
> + };
> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
> index f4add0a..d6a1f7b 100644
> --- a/drivers/media/platform/soc_camera/atmel-isi.c
> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
> @@ -19,6 +19,7 @@
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> @@ -33,6 +34,7 @@
> #define VID_LIMIT_BYTES (16 * 1024 * 1024)
> #define MIN_FRAME_RATE 15
> #define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE)
> +#define ISI_DEFAULT_MCLK_FREQ 25000000
>
> /* Frame buffer descriptor */
> struct fbd {
> @@ -885,6 +887,20 @@ static int atmel_isi_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int atmel_isi_probe_dt(struct atmel_isi *isi,
> + struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> +
> + /* Default settings for ISI */
> + isi->pdata.full_mode = 1;
> + isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;
> + isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
> + isi->pdata.data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10;
> +
> + return 0;
> +}
> +
> static int atmel_isi_probe(struct platform_device *pdev)
> {
> unsigned int irq;
> @@ -896,7 +912,7 @@ static int atmel_isi_probe(struct platform_device *pdev)
> struct isi_platform_data *pdata;
>
> pdata = dev->platform_data;
> - if (!pdata || !pdata->data_width_flags) {
> + if ((!pdata || !pdata->data_width_flags) && !pdev->dev.of_node) {
> dev_err(&pdev->dev,
> "No config available for Atmel ISI\n");
> return -EINVAL;
> @@ -912,7 +928,11 @@ static int atmel_isi_probe(struct platform_device *pdev)
> if (IS_ERR(isi->pclk))
> return PTR_ERR(isi->pclk);
>
> - memcpy(&isi->pdata, pdata, sizeof(struct isi_platform_data));
> + if (pdata)
> + memcpy(&isi->pdata, pdata, sizeof(struct isi_platform_data));
> + else /* dt probe */
> + atmel_isi_probe_dt(isi, pdev);
> +
> isi->active = NULL;
> spin_lock_init(&isi->lock);
> INIT_LIST_HEAD(&isi->video_buffer_list);
> @@ -1014,11 +1034,18 @@ err_alloc_ctx:
> return ret;
> }
>
> +static const struct of_device_id atmel_isi_of_match[] = {
> + { .compatible = "atmel,at91sam9g45-isi" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, atmel_isi_of_match);
> +
> static struct platform_driver atmel_isi_driver = {
> .remove = atmel_isi_remove,
> .driver = {
> .name = "atmel_isi",
> .owner = THIS_MODULE,
> + .of_match_table = atmel_isi_of_match,
> },
> };
>
> --
> 1.7.9.5
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
