The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 9cb9a7439121..aee9221f0f29 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -311,7 +311,7 @@
tlv320aic3105: codec@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
- gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_CKO>;
ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
/* Regulators */
--
2.21.0
