Re: [PATCH v3 3/5] dt-bindings: phy: ti: Add dt binding documentation for SERDES in AM654x SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 28/03/19 11:37 PM, Rob Herring wrote:
> On Mon, Mar 25, 2019 at 01:38:13PM +0530, Kishon Vijay Abraham I wrote:
>> AM654x has two SERDES instances. Each instance has three input clocks
>> (left input, externel reference clock and right input) and two output
>> clocks (left output and right output) in addition to a PLL mux clock
>> which the SERDES uses for Clock Multiplier Unit (CMU refclock).
>> The PLL mux clock can select from one of the three input clocks.
>> The right output can select between left input and external reference
>> clock while the left output can select between the right input and
>> external reference clock.
>>
>> The left and right input reference clock of SERDES0 and SERDES1
>> respectively are connected to the SoC clock. In the case of two lane
>> SERDES personality card, the left input of SERDES1 is connected to
>> the right output of SERDES0 in a chained fashion.
>>
>> See section "Reference Clock Distribution" of AM65x Sitara Processors
>> TRM (SPRUID7 – April 2018) for more details.
>>
>> Add dt-binding documentation in order to represent all these different
>> configurations in device tree.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>>  .../bindings/phy/ti,phy-am654-serdes.txt      | 81 +++++++++++++++++++
>>  include/dt-bindings/phy/phy-am654-serdes.h    | 13 +++
>>  2 files changed, 94 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
>>  create mode 100644 include/dt-bindings/phy/phy-am654-serdes.h
>>
>> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
>> new file mode 100644
>> index 000000000000..25a9206147ad
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt
>> @@ -0,0 +1,81 @@
>> +TI AM654 SERDES
>> +
>> +Required properties:
>> + - compatible: Should be "ti,phy-am654-serdes"
>> + - reg : Address and length of the register set for the device.
>> + - reg-names: Should be "serdes" which corresponds to the register space
>> +	populated in "reg".
> 
> *-names is kind of pointless with only 1 entry.

okay. I'll drop this.
> 
>> + - #phy-cells: determine the number of cells that should be given in the
>> +	phandle while referencing this phy. Should be "2". The 1st cell
>> +	corresponds to the phy type (should be one of the types specified in
>> +	include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
>> +	lane function.
>> +	If SERDES0 is referenced 2nd cell should be:
>> +		0 - USB3
>> +		1 - PCIe0 Lane0
>> +		2 - ICSS2 SGMII Lane0
>> +	If SERDES1 is referenced 2nd cell should be:
>> +		0 - PCIe1 Lane0
>> +		1 - PCIe0 Lane1
>> +		2 - ICSS2 SGMII Lane1
>> + - clocks: List of clock-specifiers representing the input to the SERDES.
>> +	Should have 3 items representing the left input clock, external
>> +	reference clock and right input clock in that order.
>> + - clock-output-names: List of clock names for each of the clock outputs of
>> +	SERDES. Should have 3 items for CMU reference clock,
>> +	left output clock and right output clock in that order.
>> + - assigned-clocks: As defined in
>> +	Documentation/devicetree/bindings/clock/clock-bindings.txt
>> + - assigned-clock-parents: As defined in
>> +	Documentation/devicetree/bindings/clock/clock-bindings.txt
>> + - #clock-cells: Should be <1> to choose between the 3 output clocks.
>> +	Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +
>> +   The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
>> +   for selecting the correct reference clock. This can be used while
>> +   specifying the clocks created by SERDES.
>> +	=> AM654_SERDES_CMU_REFCLK
>> +	=> AM654_SERDES_LO_REFCLK
>> +	=> AM654_SERDES_RO_REFCLK
>> +
>> + - mux-controls: phandle to the multiplexer
> 
> What does this mux?

The serdes is muxed between USB, PCIe and SGMII. The mux-controls will help to
select the SERDES function based on the board configuration.
> 
>> +
>> +Example:
>> +
>> +Example for SERDES0 is given below. It has 3 clock inputs;
>> +left input reference clock as indicated by <&k3_clks 153 4>, external
>> +reference clock as indicated by <&k3_clks 153 1> and right input
>> +reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
>> +right input of SERDES0 is connected to the left output of SERDES1).
>> +
>> +SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
>> +first refers to the CMU reference clock, second refers to the left output
>> +reference clock and the third refers to the right output reference clock.
>> +
>> +The assigned-clocks and assigned-clock-parents is used here to set the
>> +parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
>> +CMU reference clock to left input reference clock.
>> +
>> +serdes0: serdes@900000 {
>> +	compatible = "ti,phy-am654-serdes";
>> +	reg = <0x0 0x900000 0x0 0x2000>;
>> +	reg-names = "serdes";
> 
>> +	#phy-cells = <2>;
>> +	power-domains = <&k3_pds 153>;
> 
> Not documented.

Okay. I'll add.

Thanks
Kishon



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux