Document DT binding for static (non-configurable) funnel and give an
example for it.
Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Cc: Wanglai Shi <shiwanglai@xxxxxxxxxxxxx>
Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
---
.../devicetree/bindings/arm/coresight.txt | 45 +++++++++++++++++--
1 file changed, 42 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index f8aff65ab921..42935c6ca9d6 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -8,7 +8,8 @@ through the intermediate links connecting the source to the currently selected
sink. Each CoreSight component device should use these properties to describe
its hardware characteristcs.
-* Required properties for all components *except* non-configurable replicators:
+* Required properties for all components *except* non-configurable replicators
+ and non-configurable funnels:
* compatible: These have to be supplemented with "arm,primecell" as
drivers are using the AMBA bus interface. Possible values include:
@@ -24,7 +25,7 @@ its hardware characteristcs.
discovered at boot time when the device is probed.
"arm,coresight-tmc", "arm,primecell";
- - Trace Funnel:
+ - Trace Programmable Funnel:
"arm,coresight-funnel", "arm,primecell";
- Embedded Trace Macrocell (version 3.x) and
@@ -65,11 +66,12 @@ its hardware characteristcs.
"stm-stimulus-base", each corresponding to the areas defined in "reg".
* Required properties for devices that don't show up on the AMBA bus, such as
- non-configurable replicators:
+ non-configurable replicators and non-configurable funnels:
* compatible: Currently supported value is (note the absence of the
AMBA markee):
- "arm,coresight-replicator"
+ - "arm,coresight-static-funnel"
* port or ports: see "Graph bindings for Coresight" below.
@@ -200,6 +202,43 @@ Example:
};
};
+ funnel {
+ /*
+ * non-configurable funnel don't show up on the AMBA
+ * bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-static-funnel";
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ combo_funnel_out: endpoint {
+ remote-endpoint = <&top_funnel_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ combo_funnel_in0: endpoint {
+ remote-endpoint = <&cluster0_etf_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ combo_funnel_in1: endpoint {
+ remote-endpoint = <&cluster1_etf_out>;
+ };
+ };
+ };
+ };
+
funnel@20040000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
--
2.17.1
