[PATCH v11 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The TCU channels 0 and 1 were previously reserved for system tasks, and
thus unavailable for PWM.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
---
 drivers/pwm/pwm-jz4740.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index b55ee879e23d..c874a387c1d9 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -42,11 +42,7 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 	char clk_name[16];
 	int ret;
 
-	/*
-	 * Timers 0 and 1 are used for system tasks, so they are unavailable
-	 * for use as PWMs.
-	 */
-	if (pwm->hwpwm < 2)
+	if (!ingenic_tcu_pwm_can_use_chn(chip->dev, pwm->hwpwm))
 		return -EBUSY;
 
 	snprintf(clk_name, sizeof(clk_name), "timer%u", pwm->hwpwm);
-- 
2.11.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux