i.MX8QXP contains a total of 4 EDMA controllers of which two are primarily for audio components and the other two are for non-audio periperhals. This patch adds the EDMA0/EDMA1 nodes used by audio peripherals. EDMA0 contains channels for: * ASRC0 * ESAI0 * SPDIF0 * SAI0, SAI1, SAI2, SAI3 EDMA1 contains channels for: * ASRC1 * SAI4, SAI5 See chapter Audio DMA Memory Maps (2.2.3) from i.MX8QXP RM [1] This patch is based on the dtsi file initially submitted by Teo Hall in i.MX NXP internal tree. [1] https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf Cc: Teo Hall <teo.hall@xxxxxxx> Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 72 ++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 0cb939861a60..84c7c3eca1a1 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -182,6 +182,78 @@ #clock-cells = <1>; }; + edma0: dma-controller@591f0000 { + compatible = "fsl,imx8qxp-edma"; + reg = <0x59200000 0x10000>, /* asrc0 pair A input req */ + <0x59210000 0x10000>, /* asrc0 pair B input req */ + <0x59220000 0x10000>, /* asrc0 pair C input req */ + <0x59230000 0x10000>, /* asrc0 pair A output req */ + <0x59240000 0x10000>, /* asrc0 pair B output req */ + <0x59250000 0x10000>, /* asrc0 pair C output req */ + <0x59260000 0x10000>, /* esai0 rx */ + <0x59270000 0x10000>, /* esai0 tx */ + <0x59280000 0x10000>, /* spdif0 rx */ + <0x59290000 0x10000>, /* spdif0 tx */ + <0x592c0000 0x10000>, /* sai0 rx */ + <0x592d0000 0x10000>, /* sai0 tx */ + <0x592e0000 0x10000>, /* sai1 rx */ + <0x592f0000 0x10000>, /* sai1 tx */ + #dma-cells = <3>; + shared-interrupt; + dma-channels = <14>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */ + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* esai0 */ + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */ + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */ + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */ + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + interrupt-names = "edma0-chan0-rx", "edma0-chan1-rx", /* asrc0 */ + "edma0-chan2-rx", "edma0-chan3-tx", + "edma0-chan4-tx", "edma0-chan5-tx", + "edma0-chan6-rx", "edma0-chan7-tx", /* esai0 */ + "edma0-chan8-rx", "edma0-chan9-tx", /* spdif0 */ + "edma0-chan12-rx", "edma0-chan13-tx", /* sai0 */ + "edma0-chan14-rx", "edma0-chan15-tx", /* sai1 */ + }; + + edma1: dma-controller@599F0000 { + compatible = "fsl,imx8qxp-edma"; + reg = <0x0 0x59A00000 0x0 0x10000>, /* asrc1 */ + <0x0 0x59A10000 0x0 0x10000>, + <0x0 0x59A20000 0x0 0x10000>, + <0x0 0x59A30000 0x0 0x10000>, + <0x0 0x59A40000 0x0 0x10000>, + <0x0 0x59A50000 0x0 0x10000>, + <0x0 0x59A80000 0x0 0x10000>, /* sai4 rx */ + <0x0 0x59A90000 0x0 0x10000>, /* sai4 tx */ + <0x0 0x59AA0000 0x0 0x10000>; /* sai5 tx */ + #dma-cells = <3>; + shared-interrupt; + dma-channels = <9>; + interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* asrc 1 */ + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */ + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */ + interrupt-names = "edma1-chan0-rx", "edma1-chan1-rx", /* asrc1 */ + "edma1-chan2-rx", "edma1-chan3-tx", + "edma1-chan4-tx", "edma1-chan5-tx", + "edma1-chan8-rx", "edma1-chan9-tx", /* sai4 */ + "edma1-chan10-tx"; /* sai5 */ + }; + adma_lpuart0: serial@5a060000 { compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a060000 0x1000>; -- 2.17.1
