Some SPI devices expects SPI transfers to be in Least significant byte first order and some devices expect Most significant byte first order. This patch adds SPI_LSBYTE_FIRST to supported mode list and implements configuration accordingly. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- drivers/spi/spi-tegra114.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index e1669ab3b0fe..a2e809af96da 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -827,6 +827,11 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi, else command1 &= ~SPI_LSBIT_FE; + if (spi->mode & SPI_LSBYTE_FIRST) + command1 |= SPI_LSBYTE_FE; + else + command1 &= ~SPI_LSBYTE_FE; + if (spi->mode & SPI_3WIRE) command1 |= SPI_BIDIROE; else @@ -1393,7 +1398,8 @@ static int tegra_spi_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST | - SPI_TX_DUAL | SPI_RX_DUAL | SPI_3WIRE; + SPI_TX_DUAL | SPI_RX_DUAL | SPI_3WIRE | + SPI_LSBYTE_FIRST; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); master->setup = tegra_spi_setup; master->cleanup = tegra_spi_cleanup; -- 2.7.4
