From: Ondrej Jirman <megous@xxxxxxxxxx> This series enables some peripherals on TBS A711 tablet that already have mainline drivers: - GPS u-blox neo-6m (via gnss u-blox driver) - Bluetooth (via recently added OF support in the Broadcom bluetooth driver) - Accelermomter BMA-250 (hooked to the I2C bus) It also modifies A83T DTSI and adds missing UART interfaces. I've added additional compatible to the gnss/u-blox driver for NEO-6M, because this board uses this module, and I don't think I can use the existing compatible for u-blox,neo-m8, even as a fallback. Please take a look, and apply the patches if you have no objections. Many of the patches will go through the sunxi tree, but I'm not sure who will want to take the GPS patches. regards, Ondrej Jirman Ondrej Jirman (7): ARM: dts: sun8i: tbs-a711: Enable bluetooth ARM: dts: sun8i: tbs-a711: Add node for BMA250 accelerometer ARM: dts: sun8i: a83t: Add nodes for UART2-UART4 ARM: dts: sun8i: a83t: Add UART2 PB pins gnss: Add u-blox,neo-6m compatible dt-bindings: gnss: Add u-blox,neo-6m compatible ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module) .../devicetree/bindings/gnss/u-blox.txt | 1 + arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 49 +++++++++++++++++++ arch/arm/boot/dts/sun8i-a83t.dtsi | 38 ++++++++++++++ drivers/gnss/ubx.c | 1 + 4 files changed, 89 insertions(+) -- 2.21.0
