wt., 26 mar 2019 o 15:00 Adam Ford <aford173@xxxxxxxxx> napisał(a):
>
> On Fri, Mar 22, 2019 at 8:31 AM Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
> >
> > From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> >
> > The system_rev variable is never set on davinci and is always 0, so
> > we're using the default max operating point of 300MHz. The cvdd supply
> > comes from the tps6507 pmic and the voltage can go all the way to 1.3V
> > so the maximum supported rate should be 456MHz.
>
> My understanding is that only certain revisions of the silicon can go
> to 456MHz. The L138's Datasheet lists both a 456 and 375 version. I
> cannot find a way to read a register to determine which version of the
> silicon is available. Maybe Sekhar can confirm.
>
Commit 28bd2c341120 ("davinci: am18x/da850/omap-l138 evm: add support
for higher speed grades") mentions the following:
---
U-Boot on the EVM sets up ATAG_REVISION to inform the OS
regarding the speed grade supported by the silicon. We use
this information to pass on the speed grade information to
the SoC code.
---
Should the system_rev somehow reflect that revision? Any way I can check it?
Bart
> adam
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > ---
> > arch/arm/mach-davinci/board-da850-evm.c | 12 +-----------
> > 1 file changed, 1 insertion(+), 11 deletions(-)
> >
> > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> > index 1fdc9283a8c5..58b2a485b527 100644
> > --- a/arch/arm/mach-davinci/board-da850-evm.c
> > +++ b/arch/arm/mach-davinci/board-da850-evm.c
> > @@ -1155,17 +1155,7 @@ static struct edma_rsv_info *da850_edma_rsv[2] = {
> > #ifdef CONFIG_CPU_FREQ
> > static __init int da850_evm_init_cpufreq(void)
> > {
> > - switch (system_rev & 0xF) {
> > - case 3:
> > - da850_max_speed = 456000;
> > - break;
> > - case 2:
> > - da850_max_speed = 408000;
> > - break;
> > - case 1:
> > - da850_max_speed = 372000;
> > - break;
> > - }
> > + da850_max_speed = 456000;
> >
> > return da850_register_cpufreq("pll0_sysclk3");
> > }
> > --
> > 2.20.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
