Tegra194 has six PCIe controllers based on Synopsys DesignWare core. There are two Universal PHY (UPHY) blocks with each supporting 12(HSIO: Hisg Speed IO) and 8(NVHS: NVIDIA High Speed) lanes respectively. Controllers:0~4 use UPHY lanes from HSIO brick whereas Controller:5 uses UPHY lanes from NVHS brick. Lane mapping in HSIO UPHY brick to each PCIe controller (0~4) is controlled in XBAR module by BPMP-FW. Since PCIe core has PIPE interface, a glue module called PIPE-to-UPHY (P2U) is used to connect each UPHY lane (applicable to both HSIO and NVHS UPHY bricks) to PCIe controller This patch series - Adds support for P2U PHY driver - Adds support for PCIe host controller - Adds device tree nodes each PCIe controllers - Enables nodes applicable to p2972-0000 platform - Adds helper APIs in Designware core driver to get capability regs offset - Adds defines for new feature registers of PCIe spec revision 4 - Makes changes in DesignWare core driver to get Tegra194 PCIe working Testing done on P2972-0000 platform - Able to get PCIe link up with on-board Marvel eSATA controller - Able to get PCIe link up with NVMe cards connected to M.2 Key-M slot - Able to do data transfers with both SATA drives and NVMe cards Note - Enabling x8 slot on P2972-0000 platform requires pinmux driver for Tegra194. It is being worked on currently and hence Controller:5 (i.e. x8 slot) is disabled in this patch series. A future patch series would enable this. Vidya Sagar (10): PCI: save pci_bus pointer in pcie_port structure PCI: perform dbi regs write lock towards the end PCI: dwc: Move config space capability search API PCI: Add #defines for PCIe spec r4.0 features dt-bindings: PCI: tegra: Add device tree support for T194 arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT arm64: tegra: Enable PCIe slots in P2972-0000 board phy: tegra: Add PCIe PIPE2UPHY support PCI: tegra: Add Tegra194 PCIe support arm64: Add Tegra194 PCIe driver to defconfig .../bindings/pci/nvidia,tegra194-pcie.txt | 209 +++ .../devicetree/bindings/phy/phy-tegra194-p2u.txt | 34 + arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 50 + arch/arm64/boot/dts/nvidia/tegra194.dtsi | 473 +++++ arch/arm64/configs/defconfig | 1 + drivers/pci/controller/dwc/Kconfig | 10 + drivers/pci/controller/dwc/Makefile | 1 + drivers/pci/controller/dwc/pcie-designware-ep.c | 37 +- drivers/pci/controller/dwc/pcie-designware-host.c | 4 +- drivers/pci/controller/dwc/pcie-designware.c | 73 + drivers/pci/controller/dwc/pcie-designware.h | 4 + drivers/pci/controller/dwc/pcie-tegra194.c | 1862 ++++++++++++++++++++ drivers/phy/tegra/Kconfig | 7 + drivers/phy/tegra/Makefile | 1 + drivers/phy/tegra/pcie-p2u-tegra194.c | 138 ++ include/uapi/linux/pci_regs.h | 22 +- 17 files changed, 2888 insertions(+), 40 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt create mode 100644 drivers/pci/controller/dwc/pcie-tegra194.c create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c -- 2.7.4
