[PATCH V10 5/5] ARM: dts: imx7ulp-evk: Add backlight support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds i.MX7ULP EVK board MIPI-DSI backlight support.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V9:
	- update pwm label name accordingly.
---
 arch/arm/boot/dts/imx7ulp-evk.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
index a09026a..94891c7 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/imx7ulp-evk.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "imx7ulp.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "NXP i.MX7ULP EVK";
@@ -22,6 +23,14 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm4 1 50000 0>;
+		brightness-levels = <0 20 25 30 35 40 100>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
 	reg_vsd_3v3: regulator-vsd-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -40,6 +49,12 @@
 	status = "okay";
 };
 
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
 &usdhc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc0>;
@@ -57,6 +72,12 @@
 		bias-pull-up;
 	};
 
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTF2__TPM4_CH1	0x2
+		>;
+	};
+
 	pinctrl_usdhc0: usdhc0grp {
 		fsl,pins = <
 			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
-- 
2.7.4





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux