On Mon, Mar 25, 2019 at 5:23 AM Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx> wrote:
>
> This patch provides the advanced drive for I2C used pins on MT8183.
> The detail strength specification description of the I2C pin:
> When E1=0/E0=0, the strength is 0.125mA.
> When E1=0/E0=1, the strength is 0.25mA.
> When E1=1/E0=0, the strength is 0.5mA.
> When E1=1/E0=1, the strength is 1mA.
> For I2C pins, there are existing generic driving setup and the above
> specific driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA
> driving adjustment in generic driving setup. But in specific driving
> setup, they can support 0.125/0.25/0.5/1mA adjustment.
> If we enable specific driving setup for I2C pins,
> the existing generic driving setup will be disabled.
> For some special features, we need the I2C pins specific driving setup.
> The specific driving setup is controlled by E1E0EN.
> So we need add extra vendor driving preperty instead of the generic
> driving property. We can add "mediatek,drive-strength-adv = <XXX>;"
> to describe the specific driving setup property.
> "XXX" means the value of E1E0EN. So the valid arguments of
> "mediatek,drive-strength-adv" are from 0 to 7.
>
> Signed-off-by: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
> ---
> drivers/pinctrl/mediatek/pinctrl-mt8183.c | 50 ++++++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 47 ++++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 ++++++
> drivers/pinctrl/mediatek/pinctrl-paris.c | 12 ++++++
> 4 files changed, 120 insertions(+)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8183.c b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> index 6262fd3678ea..2c7409ed16fa 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
> @@ -472,6 +472,51 @@ static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
> PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
> };
>
> +static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
> + PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
> + PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
> + PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
> + PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
> + PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
> + PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
> + PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
> + PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
> + PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
> + PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
> + PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
> + PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
> + PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
> + PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
> + PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
> + PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
> + PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
> + PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
> + PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
> + PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
> + PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
> + PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
> + PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
> + PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
> +};
> +
> +static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
> + PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
> + PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
> + PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
> + PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
> + PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
> + PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
> + PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
> + PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
> + PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
> + PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
> + PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
> + PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
> +};
> +
> static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
> [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
> @@ -485,6 +530,9 @@ static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
> [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
> [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
> + [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
> + [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
> + [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
> };
>
> static const char * const mt8183_pinctrl_register_base_names[] = {
> @@ -517,6 +565,8 @@ static const struct mtk_pin_soc mt8183_data = {
> .drive_get = mtk_pinconf_drive_get_rev1,
> .adv_pull_get = mtk_pinconf_adv_pull_get,
> .adv_pull_set = mtk_pinconf_adv_pull_set,
> + .adv_drive_get = mtk_pinconf_adv_drive_get,
> + .adv_drive_set = mtk_pinconf_adv_drive_set,
> };
>
> static const struct of_device_id mt8183_pinctrl_of_match[] = {
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index b1c368455d30..ef8732e8966b 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -674,3 +674,50 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
>
> return 0;
> }
> +
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 arg)
> +{
> + int err;
> +
> + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, arg & 1);
Should 1, 2, 4 masks be defined as masks somewhere above in this file?
> + if (err)
> + return err;
> +
> + if (arg & 1) {
It's the second time you use arg & 1.
Maybe define:
int en = arg & 1;
int e0 = !!(arg & 2);
int e1 = !!(arg & 4);
Also, I feel that the code looks a little cleaner if you just return early here:
if (!(arg & 1))
return err;
> + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0,
> + !!(arg & 2));
> + if (err)
> + return err;
> +
> + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1,
> + !!(arg & 4));
> + if (err)
> + return err;
> + }
> +
> + return err;
> +}
> +
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 *val)
Is there any user for this function? If not, why do we even define it?
> +{
> + u32 en, e0, e1;
> + int err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
> + if (err)
> + return err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
> + if (err)
> + return err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
> + if (err)
> + return err;
> +
> + *val = (e0 | e1 << 1 | en << 2) & 0x7;
I'm confused. Here, e0 is bit 0, e1 is bit 1, end is bit 2. But above
in mtk_pinconf_adv_drive_set, it seems to be in this order: en, e0,
e1?
> +
> + return 0;
> +}
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> index 6d24522739d9..1b7da42aa1d5 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> @@ -63,6 +63,9 @@ enum {
> PINCTRL_PIN_REG_IES,
> PINCTRL_PIN_REG_PULLEN,
> PINCTRL_PIN_REG_PULLSEL,
> + PINCTRL_PIN_REG_DRV_EN,
> + PINCTRL_PIN_REG_DRV_E0,
> + PINCTRL_PIN_REG_DRV_E1,
> PINCTRL_PIN_REG_MAX,
> };
>
> @@ -224,6 +227,10 @@ struct mtk_pin_soc {
> int (*adv_pull_get)(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup,
> u32 *val);
> + int (*adv_drive_set)(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 arg);
> + int (*adv_drive_get)(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 *val);
>
> /* Specific driver data */
> void *driver_data;
> @@ -287,5 +294,9 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
> int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup,
> u32 *val);
> +int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 arg);
> +int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 *val);
>
> #endif /* __PINCTRL_MTK_COMMON_V2_H */
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index b59e10852bfb..dcd295f0eb4b 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -20,12 +20,14 @@
> #define MTK_PIN_CONFIG_RDSEL (PIN_CONFIG_END + 2)
> #define MTK_PIN_CONFIG_PU_ADV (PIN_CONFIG_END + 3)
> #define MTK_PIN_CONFIG_PD_ADV (PIN_CONFIG_END + 4)
> +#define MTK_PIN_CONFIG_DRV_ADV (PIN_CONFIG_END + 5)
>
> static const struct pinconf_generic_params mtk_custom_bindings[] = {
> {"mediatek,tdsel", MTK_PIN_CONFIG_TDSEL, 0},
> {"mediatek,rdsel", MTK_PIN_CONFIG_RDSEL, 0},
> {"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV, 1},
> {"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV, 1},
> + {"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV, 2},
> };
>
> #ifdef CONFIG_DEBUG_FS
> @@ -34,6 +36,7 @@ static const struct pin_config_item mtk_conf_items[] = {
> PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
> PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
> PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
> + PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strengt-adv", NULL, true),
drive-strength-adv
> };
> #endif
>
> @@ -311,6 +314,15 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
> return -ENOTSUPP;
> }
> break;
> + case MTK_PIN_CONFIG_DRV_ADV:
> + if (hw->soc->adv_drive_set) {
> + err = hw->soc->adv_drive_set(hw, desc, arg);
> + if (err)
> + return err;
> + } else {
> + return -ENOTSUPP;
> + }
> + break;
> default:
> err = -ENOTSUPP;
> }
> --
> 2.12.5
>
