Hi, On 24/03/19 9:48 PM, Sergei Shtylyov wrote: > Hello! > > On 03/21/2019 08:45 PM, Vignesh Raghavendra wrote: > >> Add DT binding documentation for Hyperbus memory devices. Only >> Hyperflash is supported at the moment. >> >> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> >> --- >> Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt | 6 ++++++ >> 1 file changed, 6 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt >> >> diff --git a/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt >> new file mode 100644 >> index 000000000000..cb408f80b868 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mtd/cypress,hyperbus.txt >> @@ -0,0 +1,6 @@ >> +Bindings for Hyperflash NOR flash chips compliant with Cypress Hyperbus >> +specification and supports Cypress CFI specification 1.5 command set. >> + >> +Required properties: >> +- compatible : "cypress,hyperflash" for Hyperflash NOR chips > > What about "cfi-flash", shouldn't it be also specified? Oh, right. I missed that. Hyperflash is CFI compliant. Will add that next time. Thanks! > >> +- reg : Address where flash's memory mapped space > > MBR, Sergei > -- Regards Vignesh
