This belated patch implements Andrew Lunn's request of "remove the phy_read() and phy_write() functions." <https://lore.kernel.org/patchwork/comment/902734/> While seemingly harmless, this causes the switch's user port PHYs to get registered twice. This is because the DSA subsystem will create a slave mdio-bus not knowing that the qca8k_phy_(read|write) accessors operate on the external mdio-bus. So the same "bus" gets effectively duplicated. Cc: stable@xxxxxxxxxxxxxxx Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx> --- This (standalone) patch should be much easier to backport than the big one. --- drivers/net/dsa/qca8k.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 576b37d12a63..14ad78225f07 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -624,22 +624,6 @@ qca8k_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phy) qca8k_port_set_status(priv, port, 1); } -static int -qca8k_phy_read(struct dsa_switch *ds, int phy, int regnum) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - - return mdiobus_read(priv->bus, phy, regnum); -} - -static int -qca8k_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - - return mdiobus_write(priv->bus, phy, regnum, val); -} - static void qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) { @@ -879,8 +863,6 @@ static const struct dsa_switch_ops qca8k_switch_ops = { .setup = qca8k_setup, .adjust_link = qca8k_adjust_link, .get_strings = qca8k_get_strings, - .phy_read = qca8k_phy_read, - .phy_write = qca8k_phy_write, .get_ethtool_stats = qca8k_get_ethtool_stats, .get_sset_count = qca8k_get_sset_count, .get_mac_eee = qca8k_get_mac_eee, -- 2.20.1
