Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx> On 3/6/19 4:11 PM, Bich HEMON wrote: > Add STM32H7 and STM32MP1 in the list of compatible socs for each > optional property. > > Signed-off-by: Bich Hemon <bich.hemon@xxxxxx> > --- > Documentation/devicetree/bindings/i2c/i2c-stm32.txt | 17 +++++++++-------- > 1 file changed, 9 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt > index 7d054f1..f334738 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt > @@ -19,18 +19,19 @@ Optional properties: > the default 100 kHz frequency will be used. > For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are > 100000 and 400000. > - For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported, > - possible values are 100000, 400000 and 1000000. > -- i2c-scl-rising-time-ns: Only for STM32F7, I2C SCL Rising time for the board > - (default: 25) > -- i2c-scl-falling-time-ns: Only for STM32F7, I2C SCL Falling time for the board > - (default: 10) > + For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode > + Plus are supported, possible values are 100000, 400000 and 1000000. > +- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25) > + For STM32F7, STM32H7 and STM32MP1 only. > +- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10) > + For STM32F7, STM32H7 and STM32MP1 only. > I2C Timings are derived from these 2 values > -- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG > - whether Fast Mode Plus speed is selected by slave. > +- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode > + Plus speed is selected by slave. > 1st cell: phandle to syscfg > 2nd cell: register offset within SYSCFG > 3rd cell: register bitmask for FMP bit > + For STM32F7, STM32H7 and STM32MP1 only. > > Example: > >
