Hi Fabio, On 20 March 2019 12:17, Fabio Estevam wrote: > Subject: Re: [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id > > Hi Steve, > > On Wed, Mar 20, 2019 at 9:06 AM Steve Twiss > <stwiss.opensource@xxxxxxxxxxx> wrote: > > > > The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as > > 'rgmii' instead of 'rgmii-id'. Meaning the RX and TX delays that were > > This patch declares it as 'rgmii-id', which contradicts the commit log. The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as 'rgmii' instead of 'rgmii-id'. Can that be read two ways? I meant the phy-mode is currently qualified as 'rgmii' instead of what it should be: 'rgmii-id'. [...] > > This patch fixes the network problems seen on the Freescale i.MX6Q/DL > > Please provide a Fixes tag. It would be good to know if this fix needs > to be applied to older kernels. I didn't put a Fixes tag in because I find this patch fixes v5.1-rc1 (which I see as broken). But the patch is not needed in v5.0 because I see that as working. So didn't see the need for a Cc: stable. Regards, Steve
