Hello Lee, All On Wed, Mar 20, 2019 at 01:02:59PM +0000, Lee Jones wrote: > On Thu, 14 Feb 2019, Matti Vaittinen wrote: > > > Add ROHM BD71837 / BD71847 specific device tree bindings for > > controlling the PMIC shutdown/reset states and voltages for > > different HW states. The PMIC was designed to be used with NXP > > i.MX8 SoC and it supports SNVS low power state which seems to > > be typical for NXP i.MX SoCs. However, when SNVS is used we must > > not allow SW to control enabling/disabling those regulators which > > are crucial for system to boot as there is a HW limitation which > > causes SW controlled regulators to be kept shut down after SNVS > > reset. > > > > Allow setting the SNVS to be used as reset target state and allow > > marking those regulators which are critical for boot. > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> > > --- > > .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 17 ++++++++++ > > .../bindings/regulator/rohm,bd71837-regulator.txt | 38 ++++++++++++++++++++++ > > 2 files changed, 55 insertions(+) > > Needs a DT Ack. I think this was already applied to regulator tree by Mark: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git/commit/?h=for-next&id=f43d1b388f9be4aa47ed42c33659243a675c5c76 Does it go in via his tree or do we need to apply it in Lee's tree too? Br, Matti Vaittinen > > -- > Lee Jones [李琼斯] > Linaro Services Technical Lead > Linaro.org │ Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
