Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> --- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 91 +++++++++++++++++++++++++- 1 file changed, 91 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 81bc85d398c1..33f1b40ee3f2 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -54,6 +54,9 @@ compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; serial0 = &uart0; serial1 = &uart3; serial2 = &uart7; @@ -63,6 +66,41 @@ stdout-path = "serial0:115200n8"; }; + reg_cam: cam { + compatible = "regulator-fixed"; + regulator-name = "cam"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_vcc5v0>; + gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_cam_avdd: cam-avdd { + compatible = "regulator-fixed"; + regulator-name = "cam500b-avdd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_cam>; + }; + + reg_cam_dovdd: cam-dovdd { + compatible = "regulator-fixed"; + regulator-name = "cam500b-dovdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_cam>; + }; + + reg_cam_dvdd: cam-dvdd { + compatible = "regulator-fixed"; + regulator-name = "cam500b-dvdd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <®_cam>; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -116,6 +154,23 @@ >; }; +&csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&csi0_pins_a>; + status = "okay"; + + port { + csi_from_ov5640: endpoint { + remote-endpoint = <&ov5640_to_csi>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + &de { status = "okay"; }; @@ -161,6 +216,36 @@ }; }; +&i2c1 { + status = "okay"; + + camera: camera@21 { + compatible = "ovti,ov5640"; + reg = <0x21>; + clocks = <&ccu CLK_CSI0>; + clock-names = "xclk"; + assigned-clocks = <&ccu CLK_CSI0>; + assigned-clock-rates = <24000000>; + + reset-gpios = <&pio 7 14 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; + AVDD-supply = <®_cam_avdd>; + DOVDD-supply = <®_cam_dovdd>; + DVDD-supply = <®_cam_dvdd>; + + port { + ov5640_to_csi: endpoint { + remote-endpoint = <&csi_from_ov5640>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; +}; + &i2c2 { status = "okay"; }; @@ -247,6 +332,12 @@ "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; + csi0_pins_a: csi_pins_a@0 { + pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", "PE11"; + function = "csi0"; + }; + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; -- git-series 0.9.1