From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx> The Synopsys SSI driver uses a mandatory clock that is not documented, so detail it in the device tree bindings. Also correct the spelling of "pins" in the "Optional Properties" section for the driver. Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx> Signed-off-by: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx> --- v2: - Seperated spelling correction and mandatory clock documentation from the optional interface clock documentation commit. --- Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index 2864bc6..bcd8f96 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -8,9 +8,10 @@ Required properties: - interrupts : One interrupt, used by the controller. - #address-cells : <1>, as required by generic SPI binding. - #size-cells : <0>, also as required by generic SPI binding. +- clocks : phandle for the core clock used to generate the external SPI clock. Optional properties: -- cs-gpios : Specifies the gpio pis to be used for chipselects. +- cs-gpios : Specifies the gpio pins to be used for chipselects. - num-cs : The number of chipselects. If omitted, this will default to 4. - reg-io-width : The I/O register width (in bytes) implemented by this device. Supported values are 2 or 4 (the default). @@ -25,6 +26,7 @@ Example: interrupts = <0 154 4>; #address-cells = <1>; #size-cells = <0>; + clocks = <&spi_m_clk>; num-cs = <2>; cs-gpios = <&gpio0 13 0>, <&gpio0 14 0>; -- 2.7.4
