The Ben Nanonote from Qi Hardware expects a specific OOB layout on its
NAND.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
Notes:
v2: New patch
v3: Use the qi,lb60 layout unconditionally if we detect that we're
running on that board.
v4: No change
v5: No change
v6: No change
drivers/mtd/nand/raw/ingenic/ingenic_nand.c | 41 ++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c
index a2450e10932a..d32d68ef0dc7 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c
@@ -72,6 +72,41 @@ static inline struct ingenic_nfc *to_ingenic_nfc(struct nand_controller *ctrl)
return container_of(ctrl, struct ingenic_nfc, controller);
}
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section || !ecc->total)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = 12;
+
+ return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 12;
+ oobregion->offset = 12 + ecc->total;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+ .ecc = qi_lb60_ooblayout_ecc,
+ .free = qi_lb60_ooblayout_free,
+};
+
static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
@@ -247,7 +282,11 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
- mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+ /* For legacy reasons we use a different layout on the qi,lb60 board. */
+ if (of_machine_is_compatible("qi,lb60"))
+ mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
+ else
+ mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
return 0;
}
--
2.11.0
