On Monday 24 March 2014 04:31 PM, Sathya Prakash M R wrote:
> Both the AM437x-Gp evm and Am43x-Epos evm
> use the same LCD panel.
> The lcd timings are added in respective dts files.
> Adds display pinctrl and enables required gpio.
>
> Signed-off-by: Sathya Prakash M R <sathyap@xxxxxx>
> ---
> arch/arm/boot/dts/am437x-gp-evm.dts | 77 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/am43x-epos-evm.dts | 73 ++++++++++++++++++++++++++++++++
> 2 files changed, 150 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 2e79bda..a178e8d 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -24,6 +24,33 @@
> brightness-levels = <0 51 53 56 62 75 101 152 255>;
> default-brightness-level = <8>;
> };
> +
> + aliases {
> + display0 = &lcd0;
> + };
> +
> + lcd0: display {
> + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
^
Lower case 'T' for consistency with how bindings are usually defined?
> + dss_pinctrl: dss_pinctrl {
> + pinctrl-single,pins = <
> + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
> + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> + 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
Lower case hex number here too and everywhere else.
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
