Hi Angus,
Am Montag, den 18.03.2019, 11:46 -0700 schrieb Angus Ainslie (Purism):
> Add the imx8mq TMU (Thermal mannagement unit) nodes for CPU,
> GPU, and VPU.
>
> Changes since v1:
>
> Removed references to multi sensor patch.
>
> Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 118 ++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 9155bd4784eb..885395e74452 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
[...]
> + thermal-zones {
> + cpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tmu 0>;
> +
> + trips {
> + cpu_alert: cpu-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit {
> + temperature = <95000>;
All the critical trip points seem to be too high. The consumer parts
have a maximum junction temperature of 95°C, so the common DT
configuration used by all boards should have a crit trip point at least
a few degrees below this value. Boards that only use the industrial
parts can always overwrite the trip points if the designer wishes to do
so.
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_alert>;
> + cooling-device =
> + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tmu 1>;
> +
> + trips {
> + cpu-crit {
Should be gpu-crit.
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + vpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tmu 2>;
> +
> + trips {
> + cpu-crit {
Should be vpu-crit.
Regards,
Lucas
