From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> Add the core mfd driver for max77650 PMIC. We define five sub-devices for which the drivers will be added in subsequent patches. Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> --- drivers/mfd/Kconfig | 14 +++ drivers/mfd/Makefile | 1 + drivers/mfd/max77650.c | 234 +++++++++++++++++++++++++++++++++++ include/linux/mfd/max77650.h | 59 +++++++++ 4 files changed, 308 insertions(+) create mode 100644 drivers/mfd/max77650.c create mode 100644 include/linux/mfd/max77650.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0ce2d8dfc5f1..ade04e124aa0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -733,6 +733,20 @@ config MFD_MAX77620 provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77650 + tristate "Maxim MAX77650/77651 PMIC Support" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Say Y here to add support for Maxim Semiconductor MAX77650 and + MAX77651 Power Management ICs. This is the core multifunction + driver for interacting with the device. The module name is + 'max77650'. Additional drivers can be enabled in order to use + the following functionalities of the device: GPIO, regulator, + charger, LED, onkey. + config MFD_MAX77686 tristate "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b4569ed7f3f3..5727d099c16f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77620) += max77620.o +obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o obj-$(CONFIG_MFD_MAX77843) += max77843.o diff --git a/drivers/mfd/max77650.c b/drivers/mfd/max77650.c new file mode 100644 index 000000000000..7a6c0a5cf602 --- /dev/null +++ b/drivers/mfd/max77650.c @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> +// +// Core MFD driver for MAXIM 77650/77651 charger/power-supply. +// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#define MAX77650_INT_GPI_F_MSK BIT(0) +#define MAX77650_INT_GPI_R_MSK BIT(1) +#define MAX77650_INT_GPI_MSK \ + (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK) +#define MAX77650_INT_nEN_F_MSK BIT(2) +#define MAX77650_INT_nEN_R_MSK BIT(3) +#define MAX77650_INT_TJAL1_R_MSK BIT(4) +#define MAX77650_INT_TJAL2_R_MSK BIT(5) +#define MAX77650_INT_DOD_R_MSK BIT(6) + +#define MAX77650_INT_THM_MSK BIT(0) +#define MAX77650_INT_CHG_MSK BIT(1) +#define MAX77650_INT_CHGIN_MSK BIT(2) +#define MAX77650_INT_TJ_REG_MSK BIT(3) +#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4) +#define MAX77650_INT_SYS_CTRL_MSK BIT(5) +#define MAX77650_INT_SYS_CNFG_MSK BIT(6) + +#define MAX77650_INT_GLBL_OFFSET 0 +#define MAX77650_INT_CHG_OFFSET 1 + +#define MAX77650_SBIA_LPM_MASK BIT(5) +#define MAX77650_SBIA_LPM_DISABLED 0x00 + +enum { + MAX77650_INT_GPI, + MAX77650_INT_nEN_F, + MAX77650_INT_nEN_R, + MAX77650_INT_TJAL1_R, + MAX77650_INT_TJAL2_R, + MAX77650_INT_DOD_R, + MAX77650_INT_THM, + MAX77650_INT_CHG, + MAX77650_INT_CHGIN, + MAX77650_INT_TJ_REG, + MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_SYS_CTRL, + MAX77650_INT_SYS_CNFG, +}; + +static const struct resource max77650_charger_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"), +}; + +static const struct resource max77650_gpio_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"), +}; + +static const struct resource max77650_onkey_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"), +}; + +static const struct mfd_cell max77650_cells[] = { + { + .name = "max77650-regulator", + .of_compatible = "maxim,max77650-regulator", + }, + { + .name = "max77650-charger", + .of_compatible = "maxim,max77650-charger", + .resources = max77650_charger_resources, + .num_resources = ARRAY_SIZE(max77650_charger_resources), + }, + { + .name = "max77650-gpio", + .of_compatible = "maxim,max77650-gpio", + .resources = max77650_gpio_resources, + .num_resources = ARRAY_SIZE(max77650_gpio_resources), + }, + { + .name = "max77650-led", + .of_compatible = "maxim,max77650-led", + }, + { + .name = "max77650-onkey", + .of_compatible = "maxim,max77650-onkey", + .resources = max77650_onkey_resources, + .num_resources = ARRAY_SIZE(max77650_onkey_resources), + }, +}; + +static const struct regmap_irq max77650_irqs[] = { + [MAX77650_INT_GPI] = { + .reg_offset = MAX77650_INT_GLBL_OFFSET, + .mask = MAX77650_INT_GPI_MSK, + .type = { + .type_falling_val = MAX77650_INT_GPI_F_MSK, + .type_rising_val = MAX77650_INT_GPI_R_MSK, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, + }, + REGMAP_IRQ_REG(MAX77650_INT_nEN_F, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK), + REGMAP_IRQ_REG(MAX77650_INT_nEN_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_DOD_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_THM, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJ_REG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK), +}; + +static const struct regmap_irq_chip max77650_irq_chip = { + .name = "max77650-irq", + .irqs = max77650_irqs, + .num_irqs = ARRAY_SIZE(max77650_irqs), + .num_regs = 2, + .status_base = MAX77650_REG_INT_GLBL, + .mask_base = MAX77650_REG_INTM_GLBL, + .type_in_mask = true, + .type_invert = true, + .init_ack_masked = true, + .clear_on_unmask = true, +}; + +static const struct regmap_config max77650_regmap_config = { + .name = "max77650", + .reg_bits = 8, + .val_bits = 8, +}; + +static int max77650_i2c_probe(struct i2c_client *i2c) +{ + struct regmap_irq_chip_data *irq_data; + struct device *dev = &i2c->dev; + struct irq_domain *domain; + struct regmap *map; + unsigned int val; + int rv; + + map = devm_regmap_init_i2c(i2c, &max77650_regmap_config); + if (IS_ERR(map)) { + dev_err(dev, "unable to initialize i2c regmap\n"); + return PTR_ERR(map); + } + + rv = regmap_read(map, MAX77650_REG_CID, &val); + if (rv) { + dev_err(dev, "unable to read the CID from device\n"); + return rv; + } + + switch (MAX77650_CID_BITS(val)) { + case MAX77650_CID_77650A: + case MAX77650_CID_77650C: + case MAX77650_CID_77651A: + case MAX77650_CID_77651B: + break; + default: + return -ENODEV; + } + + /* + * This IC has a low-power mode which reduces the quiescent current + * consumption to ~5.6uA but is only suitable for systems consuming + * less than ~2mA. Since this is not likely the case even on + * linux-based wearables - keep the chip in normal power mode. + */ + rv = regmap_update_bits(map, + MAX77650_REG_CNFG_GLBL, + MAX77650_SBIA_LPM_MASK, + MAX77650_SBIA_LPM_DISABLED); + if (rv) { + dev_err(dev, "unable to change the power mode\n"); + return rv; + } + + rv = devm_regmap_add_irq_chip(dev, map, i2c->irq, + IRQF_ONESHOT | IRQF_SHARED, 0, + &max77650_irq_chip, &irq_data); + if (rv) { + dev_err(dev, "unable to add the regmap irq chip\n"); + return rv; + } + + domain = regmap_irq_get_domain(irq_data); + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max77650_cells, ARRAY_SIZE(max77650_cells), + NULL, 0, domain); +} + +static const struct of_device_id max77650_of_match[] = { + { .compatible = "maxim,max77650" }, + { } +}; +MODULE_DEVICE_TABLE(of, max77650_of_match); + +static struct i2c_driver max77650_i2c_driver = { + .driver = { + .name = "max77650", + .of_match_table = of_match_ptr(max77650_of_match), + }, + .probe_new = max77650_i2c_probe, +}; +module_i2c_driver(max77650_i2c_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/max77650.h b/include/linux/mfd/max77650.h new file mode 100644 index 000000000000..c809e211a8cd --- /dev/null +++ b/include/linux/mfd/max77650.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 BayLibre SAS + * Author: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> + * + * Common definitions for MAXIM 77650/77651 charger/power-supply. + */ + +#ifndef MAX77650_H +#define MAX77650_H + +#include <linux/bits.h> + +#define MAX77650_REG_INT_GLBL 0x00 +#define MAX77650_REG_INT_CHG 0x01 +#define MAX77650_REG_STAT_CHG_A 0x02 +#define MAX77650_REG_STAT_CHG_B 0x03 +#define MAX77650_REG_ERCFLAG 0x04 +#define MAX77650_REG_STAT_GLBL 0x05 +#define MAX77650_REG_INTM_GLBL 0x06 +#define MAX77650_REG_INTM_CHG 0x07 +#define MAX77650_REG_CNFG_GLBL 0x10 +#define MAX77650_REG_CID 0x11 +#define MAX77650_REG_CNFG_GPIO 0x12 +#define MAX77650_REG_CNFG_CHG_A 0x18 +#define MAX77650_REG_CNFG_CHG_B 0x19 +#define MAX77650_REG_CNFG_CHG_C 0x1a +#define MAX77650_REG_CNFG_CHG_D 0x1b +#define MAX77650_REG_CNFG_CHG_E 0x1c +#define MAX77650_REG_CNFG_CHG_F 0x1d +#define MAX77650_REG_CNFG_CHG_G 0x1e +#define MAX77650_REG_CNFG_CHG_H 0x1f +#define MAX77650_REG_CNFG_CHG_I 0x20 +#define MAX77650_REG_CNFG_SBB_TOP 0x28 +#define MAX77650_REG_CNFG_SBB0_A 0x29 +#define MAX77650_REG_CNFG_SBB0_B 0x2a +#define MAX77650_REG_CNFG_SBB1_A 0x2b +#define MAX77650_REG_CNFG_SBB1_B 0x2c +#define MAX77650_REG_CNFG_SBB2_A 0x2d +#define MAX77650_REG_CNFG_SBB2_B 0x2e +#define MAX77650_REG_CNFG_LDO_A 0x38 +#define MAX77650_REG_CNFG_LDO_B 0x39 +#define MAX77650_REG_CNFG_LED0_A 0x40 +#define MAX77650_REG_CNFG_LED1_A 0x41 +#define MAX77650_REG_CNFG_LED2_A 0x42 +#define MAX77650_REG_CNFG_LED0_B 0x43 +#define MAX77650_REG_CNFG_LED1_B 0x44 +#define MAX77650_REG_CNFG_LED2_B 0x45 +#define MAX77650_REG_CNFG_LED_TOP 0x46 + +#define MAX77650_CID_MASK GENMASK(3, 0) +#define MAX77650_CID_BITS(_reg) (_reg & MAX77650_CID_MASK) + +#define MAX77650_CID_77650A 0x03 +#define MAX77650_CID_77650C 0x0a +#define MAX77650_CID_77651A 0x06 +#define MAX77650_CID_77651B 0x08 + +#endif /* MAX77650_H */ -- 2.20.1
