Re: [PATCHv2 1/1] mtd: gpmi: make blockmark swapping optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




于 2014年03月28日 16:16, Lothar Waßmann 写道:
Still there is no need for the Linux NAND driver to be able to read or
write partitions in a format that the Boot ROM can understand. Thus it
If you do not use the NAND boot, there really no need to do so.

Since you need the NAND boot, we should enable the swapping for imx28.
is perfectly legal to allow disregarding the BB marks and solely rely on
a flash based BBT.

The BB mark is in the page 0 of a NAND block. But the swapping can occur in _each_ page of
a NAND block, _NOT_ only the page 0.

I think you are confusing at these two things.

thanks
Huang Shijie









--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux