Re: [PATCH 2/2] usb: hub: use non-removable-ports DT property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mans Rullgard <mans@xxxxxxxxx> writes:

> Mark any ports listed in the non-removable-ports DT property as
> hardwired. This is useful for boards with built-in USB devices
> that cannot be (or have not been) marked as fixed in hardware.
>
> Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>
> ---
>  drivers/usb/core/hub.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Any comments on these patches?

> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 3adff4da2ee1..44ac49a30be1 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -1328,6 +1328,9 @@ static int hub_configure(struct usb_hub *hub,
>  	unsigned unit_load;
>  	unsigned full_load;
>  	unsigned maxchild;
> +	struct property *prop;
> +	const __be32 *cur;
> +	u32 val;
>
>  	hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
>  	if (!hub->buffer) {
> @@ -1629,6 +1632,17 @@ static int hub_configure(struct usb_hub *hub,
>  		}
>  	}
>
> +	of_property_for_each_u32(hub_dev->of_node, "non-removable-ports",
> +				 prop, cur, val) {
> +		if (val < 1 || val > hdev->maxchild) {
> +			dev_warn(hub_dev, "port number %u out of range\n", val);
> +			continue;
> +		}
> +
> +		hub->ports[val - 1]->connect_type =
> +			USB_PORT_CONNECT_TYPE_HARD_WIRED;
> +	}
> +
>  	usb_hub_adjust_deviceremovable(hdev, hub->descriptor);
>
>  	hub_activate(hub, HUB_INIT);
> -- 
> 2.20.1
>

-- 
Måns Rullgård



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux