On 18.03.2019 08:41, Anson Huang wrote:
> Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM binding.
>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> No changes.
> ---
> Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
>
> diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
> b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
> new file mode 100644
> index 0000000..d47b8fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt
> @@ -0,0 +1,19 @@
> +Freescale i.MX TPM PWM controller
> +
> +Required properties:
> +- compatible : Should be "fsl,imx-tpm-pwm".
> +- reg: Physical base address and length of the controller's registers.
> +- #pwm-cells: Should be 2. See pwm.txt in this directory for a
> description of the cells format.
It seems that the driver supports polarity. Can we use 3 cells so we can
specify the polarity in the device tree?
Also use 3 cells in the base device tree to enable other boards making
use of the polarity (arch/arm/boot/dts/imx7ulp.dtsi).
--
Stefan
> +- clocks : The clock provided by the SoC to drive the PWM.
> +- interrupts: The interrupt for the pwm controller.
> +
> +Example:
> +
> +pwm0: tpm@40250000 {
> + compatible = "fsl,imx-tpm-pwm";
> + reg = <0x40250000 0x1000>;
> + assigned-clocks = <&clks IMX7ULP_CLK_LPTPM4>;
> + assigned-clock-parents = <&clks IMX7ULP_CLK_SOSC_BUS_CLK>;
> + clocks = <&clks IMX7ULP_CLK_LPTPM4>;
> + #pwm-cells = <2>;
> +};
