On 07-03-19, 17:58, Jernej Skrabec wrote:
> H6 DMA has more than 32 supported DRQs, which means that configuration
> register is slightly rearranged. It also needs additional clock to be
> enabled.
Okay how many register are rearraged in the new IP block. If there are
large changes, consider using regmap_fields to abstract the register and
bit differences..
>
> Add support for it.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> ---
> drivers/dma/sun6i-dma.c | 44 +++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 42 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> index 6a37f8bb39b1..eceedd139651 100644
> --- a/drivers/dma/sun6i-dma.c
> +++ b/drivers/dma/sun6i-dma.c
> @@ -69,14 +69,19 @@
>
> #define DMA_CHAN_CUR_CFG 0x0c
> #define DMA_CHAN_MAX_DRQ_A31 0x1f
> +#define DMA_CHAN_MAX_DRQ_H6 0x3f
> #define DMA_CHAN_CFG_SRC_DRQ_A31(x) ((x) & DMA_CHAN_MAX_DRQ_A31)
> +#define DMA_CHAN_CFG_SRC_DRQ_H6(x) ((x) & DMA_CHAN_MAX_DRQ_H6)
> #define DMA_CHAN_CFG_SRC_MODE_A31(x) (((x) & 0x1) << 5)
> +#define DMA_CHAN_CFG_SRC_MODE_H6(x) (((x) & 0x1) << 8)
> #define DMA_CHAN_CFG_SRC_BURST_A31(x) (((x) & 0x3) << 7)
> #define DMA_CHAN_CFG_SRC_BURST_H3(x) (((x) & 0x3) << 6)
> #define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9)
>
> #define DMA_CHAN_CFG_DST_DRQ_A31(x) (DMA_CHAN_CFG_SRC_DRQ_A31(x) << 16)
> +#define DMA_CHAN_CFG_DST_DRQ_H6(x) (DMA_CHAN_CFG_SRC_DRQ_H6(x) << 16)
> #define DMA_CHAN_CFG_DST_MODE_A31(x) (DMA_CHAN_CFG_SRC_MODE_A31(x) << 16)
> +#define DMA_CHAN_CFG_DST_MODE_H6(x) (DMA_CHAN_CFG_SRC_MODE_H6(x) << 16)
> #define DMA_CHAN_CFG_DST_BURST_A31(x) (DMA_CHAN_CFG_SRC_BURST_A31(x) << 16)
> #define DMA_CHAN_CFG_DST_BURST_H3(x) (DMA_CHAN_CFG_SRC_BURST_H3(x) << 16)
> #define DMA_CHAN_CFG_DST_WIDTH(x) (DMA_CHAN_CFG_SRC_WIDTH(x) << 16)
> @@ -319,12 +324,24 @@ static void sun6i_set_drq_a31(u32 *p_cfg, s8 src_drq, s8 dst_drq)
> DMA_CHAN_CFG_DST_DRQ_A31(dst_drq);
> }
>
> +static void sun6i_set_drq_h6(u32 *p_cfg, s8 src_drq, s8 dst_drq)
> +{
> + *p_cfg |= DMA_CHAN_CFG_SRC_DRQ_H6(src_drq) |
> + DMA_CHAN_CFG_DST_DRQ_H6(dst_drq);
> +}
> +
> static void sun6i_set_mode_a31(u32 *p_cfg, s8 src_mode, s8 dst_mode)
> {
> *p_cfg |= DMA_CHAN_CFG_SRC_MODE_A31(src_mode) |
> DMA_CHAN_CFG_DST_MODE_A31(dst_mode);
> }
>
> +static void sun6i_set_mode_h6(u32 *p_cfg, s8 src_mode, s8 dst_mode)
> +{
> + *p_cfg |= DMA_CHAN_CFG_SRC_MODE_H6(src_mode) |
> + DMA_CHAN_CFG_DST_MODE_H6(dst_mode);
> +}
> +
> static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
> {
> struct sun6i_desc *txd = pchan->desc;
> @@ -1160,6 +1177,28 @@ static struct sun6i_dma_config sun50i_a64_dma_cfg = {
> BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
> };
>
> +/*
> + * The H6 binding uses the number of dma channels from the
> + * device tree node.
> + */
> +static struct sun6i_dma_config sun50i_h6_dma_cfg = {
> + .clock_autogate_enable = sun6i_enable_clock_autogate_h3,
> + .set_burst_length = sun6i_set_burst_length_h3,
> + .set_drq = sun6i_set_drq_h6,
> + .set_mode = sun6i_set_mode_h6,
> + .src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
> + .dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
> + .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
> + BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
> + .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
> + BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
> + .mbus_clk = true,
> +};
> +
> /*
> * The V3s have only 8 physical channels, a maximum DRQ port id of 23,
> * and a total of 24 usable source and destination endpoints.
> @@ -1190,6 +1229,7 @@ static const struct of_device_id sun6i_dma_match[] = {
> { .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
> { .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
> { .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
> + { .compatible = "allwinner,sun50i-h6-dma", .data = &sun50i_h6_dma_cfg },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, sun6i_dma_match);
> @@ -1288,8 +1328,8 @@ static int sun6i_dma_probe(struct platform_device *pdev)
> ret = of_property_read_u32(np, "dma-requests", &sdc->max_request);
> if (ret && !sdc->max_request) {
> dev_info(&pdev->dev, "Missing dma-requests, using %u.\n",
> - DMA_CHAN_MAX_DRQ_A31);
> - sdc->max_request = DMA_CHAN_MAX_DRQ_A31;
> + DMA_CHAN_MAX_DRQ_H6);
> + sdc->max_request = DMA_CHAN_MAX_DRQ_H6;
> }
>
> /*
> --
> 2.21.0
--
~Vinod
